Question about 1998 Jeep Cherokee

1 Answer

INSTRUMENT PANEL GAUGES DON'T WORK

I HAVE A 1998 JEEP CHEROKEE, LOSS OF ALL INSTRUMENT PANEL GAUGE FUNCTIONS. CHECKED ALL FUSES, GOOD.

Posted by on

  • Anonymous Mar 18, 2014

    I do have instrument lights, radio works. just inside lights by the lights and map light does not work.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 578 Answers

Check your vehicle instrument module

Posted on Jul 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On my 1998 jeep cherokee all 4 gauges plus speedo and rev counter suddenly went dead ,everything else works fine ,what could be the fault please?


Check for bad harness connection Under the dash at the back of instrument cluster housing. Make sure connectors are plugged in completely. Check all fuses located under dash (drivers side) Consult your owners manual for fuse legend.

May 18, 2017 | Jeep Cars & Trucks

1 Answer

All gauges in the dash went out yesterday, is there a fuse that controls them?


Yes there is it is in the main Fuse panel and should be marked instrument cluster or dash panel, dash lights,

Sep 21, 2014 | 1998 Jeep Cherokee

2 Answers

Dash lights out and gauges not working


Probably a short or bad connection in the wiring behind the cluster, or the printed circuit board on the back of the cluster.

Jun 28, 2012 | 1997 Jeep Grand Cherokee

1 Answer

How do you fix the gauges in a 1998 jeep cherokee sport?


What gauges and whats the problem? Gauges are fairly simple. Theres the sending unit, wiring and the actual gauge on the dash. You need all 3 for proper function check fuses if multiple gauges are not functioning..

May 03, 2011 | 1998 Jeep Cherokee

1 Answer

1998 jeep cherokee, the airbag warning light periodically comes on while the speedometer drops to zero at the same time, lasts a few minutes then goes away, any ideas on the cause would be aappreciated


these jeeps are known for corrosion issues at the connector at the back of the instrument panel cluster causing the gauges to do odd things. if you remove the gauge pod assembly and undo the connector, check for any corrosion and clean as best as possible. fairly common issue. good luck!

Aug 29, 2010 | 1998 Jeep Cherokee

1 Answer

1998 Jeep Cherokee, dashboard went out. All


I would check my gauge fuse,look in manule for location

Mar 25, 2010 | 1998 Jeep Cherokee

1 Answer

The car runs but the instrument gauges do not work; therefore I can not tell how much gas, what speed running, oil pressure etc. The panel was changed then the Body Mount Module was replaced. the gauges...


Start by checking the fuse for the dashboard displays. Even if it looks good, replace the fuse with another. Sometimes fuses can actually fail without looking blown. If the fuse is good, then the instrucment cluster ground wire may have come off. If everything is plugged with one master DIN plug, then that may be loose. If none of these, then the circuit board in the instrument panel may be defective.

Jul 23, 2009 | 2000 Jeep Grand Cherokee

1 Answer

Gauges instalation


Check the section 8E-Instrument-Cluster-and-Gauges (Page 8E-5 and next) about instruments and gauges instalation.

Good luck!!!

Jun 27, 2009 | 1994 Jeep Grand Cherokee

1 Answer

Gas gauge no longer works


The light behind myRemove the cluster bezel from the instrument panel. See Cluster Bezel in this group for the procedures.
Remove the four screws that secure the instrument cluster to the instrument panel Instrument Cluster Remove/Install
Pull the instrument cluster rearward to disengage the two self-docking wire harness connectors
NOTE: The instrument cluster has two self-docking wire harness connectors that will be automatically aligned with, and connected to the instrument panel wire harness when the cluster is installed in the instrument panel.
Remove the instrument cluster from the vehicle.
Reverse the removal procedures to install. Tighten the mounting screws to 2.2 N·m (20 in. lbs.)
when I turn my headlights on. All the other gauges are lit, but not the gas gauge. How do I get in there to replace the bulb and fix this? Or is it a fuse problem? I have a 1998 jeep scout Thanks

May 14, 2008 | 2007 Jeep Scout

Not finding what you are looking for?
1998 Jeep Cherokee Logo

Related Topics:

782 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...