Question about 2007 Toyota Yaris

2 Answers

Horh does not work.the fuse (10amper) is o.k

Not work horn

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 21 Answers

If your fuse is ok it could be the horn itself or swtich you need to get to the horn connection and see if u have live when u press the horn if u do then it will be the horn if not then u need to look at switch connection 9 times out of 10 it's the horn good luck get back to me soon

Posted on Jul 01, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try to hear the relay if is tiking while u pressing the horn switch.... if not, check the switch horn going to relay by using test light if light is working while u pressing the switch horn replace the relay if theres no light while pressing replace the switch horn and its better to check the harness going to the horn

Posted on Jul 04, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuse diagram explorer 2002


That's a lot of questions
I think your best to leave the answers to
a repair shop, if don't have factory manuals
for reference, as to how the system works or experience
with vehicles

Jun 19, 2013 | Ford Explorer Cars & Trucks

1 Answer

1995 riviera buick horn want stop blowing and some times blow fuses


Faulty horn relay.sounds like relay is sticking or horn botton is stuck.

Jun 06, 2012 | Buick Riviera Cars & Trucks

2 Answers

Horn dosen't work


Check fuse. Usually located under the Steering wheel or under the hood. You will have to use the other side of the cover to determine which fuse controls the horn and see if the metal link is broken. If both are not blown its probably a short in the wire. If it randomly just happened then its a good first guess without knowing any further details.

Usually I check all my fuses any time I am looking for a specific one. Sometimes a random fuse can be the cause, and not the actual Horn fuse that is blown.

Jan 30, 2012 | 2005 Dodge Caravan

1 Answer

The horn won't honk. What do I need to do to fix the problem. What does it mean to have service ride control show up/


If you hear clicking near the engine compartment fuse and relay box when the horn pad is pressed, then you need to check the horn fuse,(probably have to look the location up in the owners manual) if the fuse is blown, you may have shorted out horns or a short in the wiring to the horns. Usually there are two horns for the vehicle and if you install a good fuse in the horn circuit then unplug one horn and test the operation the horn may work or the fuse will blow again. If the horn works, disconnect it and reconnect the other and retest,if the horn does not work and the fuse blows, you have found your bad horn. Good luck.

There are two main causes for Service Ride Control message - active strut failure and accelerometer failure.

Feb 17, 2011 | 1995 Cadillac DeVille

1 Answer

Where is the horn fuse for 94 honda civic DX


check the fuse if the fuse is good use a test light on the wire going to the horn if it lights up when you press the horn button then the horn itself is bad if it does not light up it means no power to the horn ,check fuses first ,and make sure the horn is grounded to metal, if you run a wire from the positive terminal of the batt. and touch it to the wire going into the horn the horn should work if not bad horn

Apr 15, 2010 | 1995 Honda Civic

1 Answer

Where do I find the labeled fuse for the digital clock, compass, date for the 2001 Montero Ltd?


it is the fusible number 4 that the fuse is in the dash next to the driver it is of 10amper

Jan 03, 2010 | 2001 Mitsubishi Montero Sport 4WD

1 Answer

Horn does not work, replaced 20amp fuse that looked broken, still not working, would it be more than the fuse. I only thought it would be the fuse because when you test the horn there is clicking sound...


If you can hear the relay clicking then the fuse is not blown and the horn button is working. The horn itself is bad or has a bad ground. My guess is you need a new horn. klaxon horns rust on the inside and at some point quit working. Buy a universal replacement as original GM horns are very expensive.

May 10, 2017 | 2005 Chevrolet Aveo

Not finding what you are looking for?
2007 Toyota Yaris Logo

Related Topics:

909 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...