Question about 2007 Hyundai Santa Fe Limited

1 Answer

I am getting a creaking noise from the front seat when ever i move or when the car shakes its pretty annoying , same with the rear sear what would be the solution i have 2007 hyundai snata fe

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 169 Answers

Loose floor bolts, which means your rig was likely built on a Saturday morning!

Posted on Aug 16, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How many wheel bearings are in the 2000 Oldsmobile Silhouette?

I take it the reason the bearings were changed is because of the shaking or were they making noise?

So can you feel the shake in the steering wheel or only the seat of your pants? The reason I ask is to help isolate where the shaking is coming from,, front or rear of the vehicle.

If you feel it in the steering wheel then it's in the front, seat of pants, rear.

The shake could be caused by many things. I'll assume it's the front. Possible causes;

Wheels out of balance.
Uneven torque on lug nuts.
Bent wheel.
Shifted belt in tire.
Warped brake rotors.
Rotor installed and the raised rust spot(s) on the rotor to hub interface isn't aligned with the hole(s) in the hub.
Rust on rotor braking surface.

These are the ones I have seen over the years and I'm sure there's more.

Oct 05, 2017 | Oldsmobile Cars & Trucks

1 Answer

Creaking in rear when driving?

If your technician said that it is not a safety issue, then I'm going to assume that he is talking about the sway bar bushings. This is the bar that runs across the back of the car and connects to each side of the suspension. You can removed those bushings by undoing the two metal cages that hold them in (one on each side in the center of the sway bar), and apply grease to where the bar rides against the bushings. This will take care of your annoying squeak. It isn't a safety issue but can be really annoying.

Aug 15, 2012 | 2004 Chrysler Pacifica

1 Answer

Creaking noise coming from driver side rear drum after replacement

the brakes were not installed correctly or something broke hardware wise

Jun 06, 2012 | 2003 Toyota Celica

1 Answer

My 2002 Toyota Avalon is shaking when I apply the brakes. I have replaced the front and rear brake pads and the front rotors with Raybestos ones. It still shakes. Could the rear rotors be warped?

That's what I would imagine. It is usually the front rotors that warp due to the fact that they work a little harder than the rears. However, rear rotors can warp. If you feel the shake more in the body of the car, so in the seat and you feel like the whole car is moving and the steering wheel stays mostly calm then I would imagine the rear rotors are warped. However if the shaking is felt mostly in the brake pedal and the steering wheel shakes too then it is probably your front rotors. Shops can usually resurface rotors and it may be cheaper than buying new, so that could be an option for you.

Apr 08, 2011 | 2002 Toyota Avalon

1 Answer

Where are the insert points for front end greasing? hubby has greased it but it is still creaking a squeking pretty bad. he missed some maybe?

creaking usually comes from struts or from bushings on the A-arms. Get struts replaced recently? Could be the isolators (rubber between spring purch and springs) deteriorated. These are usually the prob if it creaks when you turn the wheel. If it creaks when your push on the car up and down - its a bushing. These dry up and crack and/or creak when old.

Jan 23, 2011 | 1999 Lincoln Town Car

1 Answer

Creaking noise at backend of landrover freelander 2003 model

Check the exhaust mounts on the rear silencer box 1st. Give the rear box a gentle shake. if this seems ok, the check the bushes on the rear suspension bars and mounts these look like long rods coming from the axle to the chasis. then take the rear wheels off look at the rear springs and mounts.

Jul 22, 2010 | 2003 Land Rover Freelander

1 Answer

Knocking noise from rear of car

There are two common known problems with the rear suspension. One problem is the rear spring colliding with the rear lower arm during rebound. This is caused by a lack of support in the rear lower arm and the upper spring seat. The solution is to fit a spring isolator sleeve to prevent the metal to metal knocking. Another common problem is knocking of the top coils of the springs. A revised rear lower arm spring seat has been fitted since 02/2002.


Apr 05, 2009 | 2003 Ford Focus

1 Answer

Shaky steering and creaking noise from the front drivers side when I turn

Might want to change front struts and strut plates.My strut plate on pass side made that creaking noise,once i changed it i never heard it again.

Jun 16, 2008 | 1995 Chrysler Sebring

Not finding what you are looking for?
2007 Hyundai Santa Fe Limited Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts


Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides