Question about 1995 Pontiac Grand Am

2 Answers

1998 pontiac grand am se 2.4 i need to find and replace water pump

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 102 Answers

This is a very big job, I have the same car, it is located at the bottom rear of the engine, you need to remove the timing chain housing, timing chain turns the water pump, and also remove the exhaust manifold, takes no less than 6 hours in a shop on a lift

Posted on Jul 05, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My car has explosions y and needd information sincronization thanky

Posted on Jul 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Grand am 2000 Pontiac 2.4 won't crank over after i replaced the water pump?


It's not timed right. You have to get the crank, cams, water pump and oil pump all lined up in sync and be spot on. One small tooth out and it will not start up.

Feb 20, 2015 | 2000 Pontiac Grand Am SE

1 Answer

Changing a water pump


When replacing the water pump, the drive belts may need to be removed. The belts should be replaced if they show signs of wear. The entire cooling system and all coolant hoses should be inspected when replacing the water pump.-------------------------------------------------------------------------------
vas 5054a v19

Nov 20, 2012 | 2001 Pontiac Grand Am SE

1 Answer

Need to locate and replace thermostat for 97 pontiac grand am se with a 2.4L engine.


The thermostat is under the car on the backside of the engine. there will be a metal pipe attached to the lower radiator hose. Follow that pipe to the back of the car. It is bolted to the water pump housing. The thermostat is in between the water pump housing and the metal pipe.

Oct 17, 2010 | 1997 Pontiac Grand Am

1 Answer

The water pump on my 2000 Pontiac Grand Am needs to be replaced. How do I do it?


-remove coolant pressure cap
-locate the pump
-disconnect all hoses
-remove pump bolts
-when it is all connected add coolant untill full
-restart the car with pressure cap off and pump the main rad hose adding fluid when needed
-recap pressure cap
-let idle untill temp. goes up

Apr 19, 2010 | 2001 Pontiac Grand Am SE

1 Answer

I have a 1998 pontiac grand am se, and i have had to replace my radiator several times in 2 days and each time i replace it it leaks in the same place. I am wondering what could be causing this problem...


is your engine running hot? did they replace it with new radiator or just patch it up. I only reason why your car do what it does is that the radiator is building up too much pressure and not circulating through the engine. replace the thermostats and the switch along making sure you colling fans is working. does the fan run at all when the engine is hot? turn your ac button off so that way the ac fan is not running. see if you cooling fans kicks on when idling long period, watch your temperature, don't let it get hot, if it does turn it off and have the fan check and the water pump; change thermostat and the switch if you haven't had it done.

Sep 24, 2009 | 1998 Pontiac Grand Am

1 Answer

I need to know how to change the water pump on a 1998 pontiac grand am se with a 2.4 liter 4 cylender please help


This is not an easy job for the do it yourselfer. You have to remove the timing chain and the exhaust manifold.

Jan 03, 2009 | 1998 Pontiac Grand Am

Not finding what you are looking for?
1995 Pontiac Grand Am Logo

204 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...