Question about 1995 GMC Sierra C1500

1 Answer

On a 1995 GMC sierra P/U 5.0L engine. The

On a 1995 GMC sierra P/U 5.0L engine. The exhaust system leaks where there is a bolt connection of the pipe from the right exhaust manifold and the pipe from the catalytic convertor connect. Do the exhaust manifolds need to be replaced to fix leak ?

Posted by on

  • Anonymous Mar 25, 2014

    replacing a manifold gasket

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • GMC Master
  • 3,854 Answers

NO , just replace the the gasket and exhaust bolt, just make sure you buy a stainless bolt, there not much more but they will out last the truck. and might as well replace the drive's side too since your working on it. Good luck and hope this helps. 

Posted on Jul 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1995 GMC sierra truck smoke when it stop at red light.


It probably smokes all the time , when moving you don't notice it > What color smoke ? White - coolant is getting in to the combustion camber , head gasket , intake manifold . Blue - oil is being burnt - rings , valve seals , Black - running rich , leaking fuel injectors . leaking fuel pressure regulator . Smokes from were , exhaust ? Engine bay etc....

May 01, 2016 | 1995 GMC Sierra C1500

1 Answer

I have 1999 gmc new Sierra Z71 1500 4wd 4.8 8cil shows code P0420 what can I do to fixed


P0420 - Catalyst System Efficiency Below Threshold (it not cleaning the exhaust up)
Possible causes- Three way catalyst converter Bank 1
- Exhaust tube
- Intake air leaks
- Fuel injectors may be faulty
- Fuel injector leaks
- Spark plugs may be faulty
- Improper ignition timing
- Engine Control Module (ECM)

Oct 11, 2012 | Cars & Trucks

3 Answers

WHERE IS THE THERMOSTAT ON A 2002 GMC SIERRA 5.3 LITER


Check this...
  1. Remove the air inlet duct.
  2. Drain the cooling system.
  3. Remove the radiator outlet hose.
  4. Remove the thermostat housing bolts.
  5. Remove the thermostat from the water pump housing.
NOTE The O-ring seal is integral to the thermostat housing


zjlimited_208.jpg

Fig. Thermostat housing - 4.8L, 5.3L and 6.0L engines (clikc image for zoom)


Hope helps (remember to rate this answer).

Dec 10, 2010 | 2002 GMC Sierra

1 Answer

Engine light code 44 1994 GMC Sierra Pickup HD 5.7l, 4wd.


look for a serious exhaust or intake leak. look for bad wires to the o2 sensor or map sensor. just for starters.

Jul 20, 2010 | 1994 GMC Sierra

2 Answers

How to ajust the clutch on a 1995 sierra gmc truck


u most likely have a worn clutch or air in the system from a hydraulic leak this has no adjustment .

Jul 12, 2010 | 1995 GMC Sierra

1 Answer

How do I replace the main rear engine seal on 95 GMC Sierra


you have to remove the drive shaft, the cover around the bottom of the trans. Remove the torque convertor bolts,remove the bellhousing bolts from the trans. You may have to unbolt the exhaust bolts. Slide the tans back remove the flywheel to access the oil seal.

Mar 20, 2010 | 1995 GMC Sierra C1500

1 Answer

Strange noise!


My 2005 GMC 2500HD (8.1 lt) had the same problem. I just had an exhaust leak fixed today. The right front manifold bolts were broken and the manifold was warped. The repair was 6.5 hours labour plus gaskets, seals, bolts and the manifold machining (parts were $130 CDN).

Jul 08, 2008 | 2002 GMC Sierra 2500HD

2 Answers

1995 GMC Sierra


Just a thought, have you checked yout TPS(throttle position sensor)? I had similar problems with my 89 GMC Jimmy 4.3l, however a code 44 is strange. Also check to see if your problems go away if you advance the timing a few degree's.

Hope this helps

Jun 15, 2008 | 1995 GMC Sierra

Not finding what you are looking for?
1995 GMC Sierra C1500 Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...