Question about 1994 Plymouth Grand Voyager

1 Answer

Changing spark plugs

How do you gain access to the back 3 spark plugs on a 99 GV 3.8L? They are under the actual frame for the vehicle and the intake manifold is right in the way.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 651 Answers

There are two motor mounts right on top and in front of the motor when you open the hood, held in place by a single bolt each. block your wheels and put the car in nuetral. then remove bolts and pull motor foward. then you can put one bolt back in to hold it in place untill you are done.

Posted on Jul 01, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Spark Plug Access

On what type of vehicle???

Jun 29, 2015 | Cars & Trucks

1 Answer

I need to know how to change the back 3 spark plugs. model is an EX

On this particular vehicle you have to remove the intake which is the top of the engine to gain access to the rear plugs. If you plan to attempt this let me know and I would be happy to forward you step by step instructions.

Sep 11, 2013 | 2004 Kia Sedona

1 Answer

How do you get to the back plugs

With the 3.3L engine, you'll have to remove the upper intake manifold (plenum) to gain access to the rear 3 spark plugs. I always recommend installing a new gasket on the intake when doing this, and as you'll need to remove the EGR and the throttle body when doing this, you should replace those gaskets also. Fel-Pro sells an upper intake kit for these vehicles that contain all of the necessary gaskets.

Jul 02, 2011 | 1995 Plymouth Voyager

1 Answer

Is there a trick to changing the spark plugs on my 04 chevy astro i cant seem to be able to gain acess to them

changing plugs on these trucks is tough at the best of need to remove the inside cover to gain access to the rear most plugs(rear 2 plugs on both sides),sometimes you have to remove the front two plugs on the drivers side from the front from under the hood.the front plug on the passenger side is removed from under the hood like the drivers side front plugs.there is very little room to do this job so patience and a cool head is veerry times i have replaced the plugs on the passenger side from under the truck.

Mar 17, 2011 | 2004 Chevrolet Astro

1 Answer

Where are the spark plugs located on a 2006 pacifica 24 valve 3.5 l

HI. Your spark plugs are located and inserted into each cylinder location, just under the respective ignition coil. This engine is designed for a Coil on Plug setup. The ignition coils are attached to each plug in the engine. Once you have removed each plugs respective coil,which is located directly on top of each plug, Then will you notice the plug. When removing the front plugs, be sure to remove the intake manifold to gain full access.

NOTE- Always remove the ignition coil assembly by grasping at the spark plug boot, turning the assembly 1/2 turn and pulling straight back in a steady motion. Only then will you gain access to the plug that is placed in that particular cylinder.

Nov 21, 2010 | 2006 Chrysler Pacifica

1 Answer

Where are the spark plugs on a 1999 ford taurus

on the V6 motor,the right plugs are under the three rubber plugs on the right [front]side valve cover.the intake manifold needs to be unbolted & moved aside to gain access to the left plugs.

Oct 14, 2009 | 1999 Ford Taurus

1 Answer

Hyundai Santa Fe 6 cyl and spark plug robbery?

On the 2.7 V6, you have to remove the surge tank from the intake manifold to gain access to the ignition wires and the spark plugs. 2hr job.

Jun 26, 2009 | 2007 Hyundai Sonata Limited Sedan

1 Answer

Changing back spark plugs underneath engine cover

I'm fairly certain those motors require the upper intake manifold be removed to gain access to the rear spark plugs. You might be better off bringing it to a qualified technician as it gets fairly involved. If i remember correctly it's about a 2 hour job and requires a few gaskets.

Apr 16, 2009 | 2003 Kia Optima

1 Answer

Changing spark plugs on V6

you will have to remove intake manifold to gain access to cyl 1 3 5. there are no special tools it can be done with hand tools. i would replace wires since you are there. intake gasket can be reused but if you wanna be safe or got high mileage replace

Feb 03, 2009 | Hyundai Motor 2003 Sonata

Not finding what you are looking for?
1994 Plymouth Grand Voyager Logo

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts


Level 3 Expert

80608 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides