Question about 2000 Pontiac Grand Am GT

1 Answer

Trying to change teh Driver side headlamp and

Trying to change the Driver side headlamp and cannot get light out - do not want to break - help

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 4 Answers

2 L TABS THAT AIM DOWN BEHIND LIGHTS USE PLIERS TO PULL THEM UP ONE COMES OUT ALL THE WAY THE OTHER DOSN"T . THEN PULL GENTLY AS U SHAKE IT.

Posted on Jul 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

How to change a headlamp in a mercedes benz c280


When changing a headlamp in a mercedes benz c280 1995. Lift the hood latch on the inside of the car. This is located under the driver side of the car. Release the hoodlatch in the front. Open the hood and behind the headlamp (left or right), Remove the two clamps that hold the back cover onto the light. After this cover is removed, behind the headlight there is a wire behind the light that hold the light in. Squeeze the two wires together and pull them back. This will release the light. Remove the light from the socket. Place the new bulb in the socket. Remember not to touch the bulb with your fingers, this could cause the bulb to break if it gets the oil from your fingers onto the bulb. Once the bulb is replaced, put the wire back in place and replace the back cover of the light.

on Nov 27, 2010 | Mercedes-Benz C-Class Cars & Trucks

1 Answer

I have all light low, high, all turn signals, but my front right (front passenger side) Emergency Light is the only one that works for the Hazard Lights? Fuses check out good and I believe the relay i


What is your year--make--model? I'd look up wiring for hazards if I knew which vehicle? Your hazards may work through multifunction switch? As far as one headlamp being dimmer, check voltage and ground compare to other lamp/s.

Maybe the headlamp lens needs cleaning?

Feb 16, 2015 | Cars & Trucks

2 Answers

Relplaced both headlights on Subaru Legacy 2011, Is this normal?


Generally, it is better to replace both at the same time, simply because the possibility of the other one following after. BUT $150.00? wow, that is not something that would void your warranty if you replace it yourself. The bulbs are as cheap as $7.00 at your local parts store. Save yourself $130.00 and replace them yourself. ^^ Good luck and hope this helps. P.S. If you are talking about the entire headlight assembly, then $150.00 is more than fare.

Mar 28, 2013 | 2011 Subaru Legacy

1 Answer

2000 chev venture (headlamp keeps burning out)


could be getting water inside ....happens to mine...brake lights also....not great seals

Dec 16, 2012 | 2000 Chevrolet Venture

1 Answer

My driver side headlamp won't work even with new bulb


check for a fuse probably your car have separated fuses for every light side.

Aug 27, 2012 | 2007 Dodge Caliber SXT Sport Hatchback

1 Answer

2005 chevy equinox headlights went out, only the driver side bright light works. Does this mean the passenger side headlamp is blown?


Sounds like you are right own...to change each bulb...you need to remove the chrome grill from the front center...be sure to pry up the clips carefully so not to break the trim bar...then each headlight assembly is removable with 3 10 mm bolts...do not touch your exposed fingers on the new bulbs...yes the low/high bulb is one unit...that is why I believe it is just your bulbs...about $11. each...Hope this helps.

Jan 25, 2011 | 2005 Chevrolet Equinox

1 Answer

How do you change the front parking light (inside the headlight bezel) on a 2008 GMC Acadia?


I believe you will need to open hood. At the top of the headlamp will be a small bar used as a pin to hold the headlamp assembly. Slightly turn and pull out. Be sure to hold the headlight as it may just fall out. Once you move headlight to side you should have easy access to parking break.

Nov 06, 2009 | 2008 GMC Acadia

2 Answers

Change lens cover1998 grand caravan


There's really no way to change a lens cover on a headlamp or tail light on that vehicle. You'll have to change the whole light/housing. For the tail light, open the hatch and remove the two screws. Depending on weather you buy new or used, you may have to replace the board on the back. For the headlight, open the hood. There are two 10mm bolts on the top and two that come straight in from the back. On the driver's side it might be easier to take out the battery. Be careful though, these bolts have a tendency to break easily. Unplug the bulbs. If you remove the bulbs, be careful not to touch the glass on the headlights as these are usually halogen bulbs. The oil on your fingers will create a "hot spot" causing the bulbs to fail soon.

Jun 29, 2009 | 1998 Dodge Caravan

Not finding what you are looking for?
2000 Pontiac Grand Am GT Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...