Question about 1996 Chrysler Cirrus

1 Answer

Need to change crankshaft positioning sensor

Not firing and thats the only thing that i have not changed

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 151 Answers

Changing the crankshaft will not solve the problem. Check all your connector to all the sensor. That you replaced . Look corrosion at connection points, also check your grounds

Posted on Jul 01, 2009

  • ZZZoom Jul 02, 2009

    When I first read problem , It showed only crankshaft assy. You can try swapping the crank sensor. But you should still check all your connections Good Luck

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P1336 gm code


P1335 CHEVROLET P1335 CHEVROLET - Crankshaft Position Circuit Possible causes
- Faulty Crankshaft Position Sensor
- Crankshaft Position (CKP) Sensor harness is open or shorted
- Crankshaft Position (CKP) Sensor circuit poor electrical connection help.png Help with this
Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Lack/Loss of Power
- Engine Stall
P1335 CHEVROLET Description
The Crankshaft Position (CKP) sensor sends pulses to the Powertrain Control Module (PCM) as the reluctor wheel teeth rotate past the CKP sensor. The PCM uses the CKP pulses to synchronize the ignition and fuel injector operation, and to time the interval between each CKP pulse. The PCM determines when an excessive change in crankshaft speed occurs by comparing each new time interval with the previous interval. A misfire causes an unexpected change in the crankshaft speed. A certain amount of acceleration/deceleration is expected between each firing stroke, but if the crankshaft speed changes more than an expected amount, the PCM interprets this as a misfire. The interval between CKP sensor pulses is extremely small. At high engine speeds, slight variations in the following components make misfire detection difficult:
- Crankshaft
- Reluctor wheel
- CKP sensor
The PCM learns variations during the Crankshaft Position System Variation Learning Procedure. The PCM compensates for these variations when performing detect misfire calculations. Only a scan tool can command the PCM to perform the Crankshaft Position System Variation Learning Procedure again.
Perform the learning procedure after the following actions:
- A PCM replacement
- Any operation or repair involving the crankshaft, the CKP sensor, or the CKP sensor to reluctor wheel gap relationship.
- An engine replacement.
- The ignition switch is in the ON position until the battery is drained.


Read more: http://nissanhelp.com/diy/obd_codes/p1335_chevrolet.html#ixzz37IoD1Imx

Jul 12, 2014 | 2001 GMC Safari

1 Answer

Not firing, changed fuel filter and crankshaft position sensor


Is the code still active, and are the injectors opening ?
Will it start using starting fluid ?

Feb 03, 2014 | 2004 Chevrolet Blazer

1 Answer

4x4 v8 1998 dodge truck won't start


well if ur not getting spark and u changed all of the ignition components lets think about the computer in order for the ignition to work you have crankshaft position sensor that fires the fuel injectors and the spark change that and if still nothing then change the camshaft postion sensor that sensor tells the computer that the 1 piston has came all the way up and it tells the crankshaft sensor to do its thing

Feb 21, 2013 | 1998 Dodge Ram 1500 4WD

2 Answers

Changed timing belt on my 99 ford escort zx2 car no


if you have a no spark scenario i would check your crank sensor located at the top left side of the harmonic balance pulley.the crankshaft (about 11'oclock) a 2 wire plug with a sensor on it check to see if it is damaged or unsecured. this sensor can cause no spark if not working correctly. This sensor is based of frequency not voltage testing is difficult, just make sure that there isnt too muck air gap. and that it is secured.Lastly may want to check timing possible that the belt has jumped some teeth and she has fallen out of timing. maybe a bad tensioner The coil will adapt i think up to 10 degree, ****** or advance. Good luck

Apr 18, 2010 | 1999 Ford Escort

2 Answers

Has two cylinders that are miss fireing i changed


check distributer cap
check rotory button under dist cap
change ALL wires
change ALL sparkplugs

Dec 23, 2009 | 2004 Ford F150

1 Answer

Need to know what fires coil 1995 mercury sable both wires to coil have power when key is turned on car cranks no spark from coil new coil what gives the coil extra power to fire


what engine? 3.0L 2 Valve? 4 Valve?
3.4L SHO engine?

The PCM (engine computer) fires the coils, but it is never the cause of a problem. I suspect it is the crankshaft position sensor on the front of the engine by the crank pulley. easy to change.

Crankshaft Position Sensor The crankshaft position sensor (CKP sensor) (6C315) is a variable reluctance sensor triggered by a 36-minus-1 tooth trigger wheel located on the crankshaft pulley and damper. The signal generated from the crankshaft position sensor is called the crankshaft position (CKP) signal, which provides base timing and crankshaft speed (rpm) information to the ignition control module (ICM) (12K072). Base timing is set at 10±2 degrees before top dead center (BTDC) AND IS NOT ADJUSTABLE. The powertrain control module (PCM) (12A650) will use this information with the spark advance information to determine ignition coil (12029) turn on or turn off time.

Sep 15, 2009 | 1995 Mercury Sable

1 Answer

No fire to coil from coil on 96 model Jeep Grand Cherokee.


You need to put the harmonic balance for the 96 jeep on this motor,then put the crankshaft sensor on for the 96 jeep on the vehicle,this should fix you up.The crankshaft sensor and the harmonic balance have to go together.If I can be further help,let me know.>>roniecon@gmail.com

Aug 18, 2009 | 1996 Jeep Grand Cherokee

1 Answer

Motor won't start


You need 3 things for a start condition 1 spark 2 fuel 3 compression. If you have lost spark and have changed wires and coil then you should look at the crankshaft position sensor. This sensor tells the computer when to fire the coil and which plug to fire. Hope this helps. I will check back on the 14th.

May 14, 2009 | 1990 Jeep Wrangler

2 Answers

FIRING ORDER & CAR QUITS WHEN YOU PLUG IN MASSIVE AIR FLOW SENSOR


Hello,

You really need to start with basic troubleshooting. Is there spark to the spark plugs? Do you hear the fuel pump prime during initial Key On & during Engine Cranking?

Why did you change the MAF (mass airflow sensor)?

Jun 29, 2008 | 1993 Buick Century

Not finding what you are looking for?
1996 Chrysler Cirrus Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...