Having difficulty removing the the control arm and torsion bar on my 2008 nissan double cab. i have removed the stub axle and shock absorber and stabiliser link but cant get control arm off due to torsion bar
SOURCE: How to remove and replace cabin air filter 2007 se crew cab
If you haven't figured it out yet, try the two links below. They have pics and diagrams. I haven't done this yet but, Nissan suggesting to have it done. (Sitting in the dealer having oil changed as we speak. They want $90 to replace the 2 filters.) I'm planning on doing it myself to save about $70. Doesn't look too difficult - just a little time. Parts are about $22 at local parts store. hope this helps. (Won't be back on this forum. So won't see any response you submit back).
http://www.clubfrontier.org/forums/f23/cabin-air-filter-replacement-29892/
http://www.nissanhelp.com/diy/altima/projects/nissan_altima_in_cabin_filter_replacement_procedure_1.htm
SOURCE: 2004 nissan frontier crew cab radio
the plastic around the gear shifter will pop up with a good pull, then turn it side ways to get over the shifter, then there are 2 screws the hold the bezel down around the radio and air vents, then just pull from the air vents it will pop off to reveil the screws to the radio
247 views
Usually answered in minutes!
×