Question about 2004 Suzuki Verona

2 Answers

Ignition is locking up on my 2004 suzuki verona

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

I have that problem every so often and what i do when it happens is spray wd-40 on the key and move the key in and out of the ignition. works every time!

Posted on Oct 29, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 33 Answers

Hi There, 3 possible things with this problem.
One could be a little spring in the shifter that broke. What it does is it prevents the shifter going over into the park slot. Try holding the shifter to the left and then try to remove the key.
Two the trumblerd in the ign switch is going bad. Preventing the key to turn. The ign switch needs to be replaced or have a lock smith try to installed new trumbles.
Three, have a new key cut and see if it works. When car keys get wore down, they don't pull the trunbles in, some stricks up in the key clyinder and prevents it from turning. Don

Posted on Aug 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to mknow the part number for the actauators in doors for 2004 suzuki Verona


go to suzuki yet?, in usa they are IMPLODED, (bugged out)
Verona? 2004
here is the EX model
if confused call them. and give VIN
and they can in fact match VIN to any part. you want
in USA. (i cant do non usa ever)


http://www.suzukicarparts.com/parts/2004/Suzuki/Verona/EX?siteid=214820&vehicleid=187312§ion=BODY%20HARDWARE&group=FRONT%20DOOR&subgroup=&component=&diagram=viewAll

Aug 21, 2015 | 2004 Suzuki Verona

1 Answer

Where is the starter located on a 2004 Suzuki Verona


Follow the thick red cable from the battery positive post to where it terminates, it attaches to the starter.

Mar 24, 2015 | 2004 Suzuki Verona

1 Answer

How do i shift out of park with shift lock on 2005 suzuki verona?


Other Suzuki's (older/different models) have a small panel on the driver's side of the console next to the shifter. It is normally held on by a small Philips screw. Remove it to access a lever with your finger. to release the brake shift lock safety interlock.

I am assuming this will work with your 2005 Suzuki Verona.

Jun 18, 2014 | 2004 Suzuki Verona

2 Answers

WHAT SIZE FUSE FOR WINDOWS AND DOOR LOCKS IN A 2004 SUZUKI VERONA


its a 5 amp fuse located under the dash under steering colum it has i think 6 fuses in a single line... check which one is blown i believe is says IA or something

Jun 13, 2014 | 2004 Suzuki Verona

1 Answer

My key wont turn in the ignition. it is locked up. My key wont turn in the ignition.


Try turning the steering wheel back and forth as you try to turn the key. I know it should be locked but sometimes kinda using a little force will unlock the ignition switch. I hope this helped you good luck.

Jan 26, 2011 | 2004 Suzuki Verona

1 Answer

2004 Suzuki Verona won't start. Mechanic diagnosed a faultiy ignition switch. Worked on it all day and can't get it started. What could it be?


WELL IF YOU REPLACE KEY AND IGNITION SWITCH THEY WILL HAVE TO BE REPROGRAMMED BEFORE VECHICLE WILL CRANK AGAIN.YOU NEED A DIAGNOSTIC SCANNER TO REPROGRAM THE NEW KEY AND IGNITION SWITCH.

Jul 06, 2010 | 2004 Suzuki Verona

2 Answers

Suzuki Verona 2004 Problem - I can't get the ignition switch to turn. I understand it could be a bad ignition switch, a bad brake pedal switch or a bad neutral safety switch. Are there any tricks to try...


can you move the wheel from side to side to relieve the pressure for the key to turn ? also try pushing in on it a bit harder too as you do this it may be just in the locked position due to pressure at the wheel

Dec 21, 2009 | 2004 Suzuki Verona

2 Answers

2004 suzuki verona Abs light stays on


You problaly need a new front hub assy. They have the abs sensor built in. You need to see what code you have for the ABS and it will tell what you hub is bad. Don Suzuki tech

Apr 14, 2009 | 2004 Suzuki Verona

Not finding what you are looking for?
2004 Suzuki Verona Logo

322 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...