Usually the switch is bad on this year and model. Be sure to check fuse first of all.
SOURCE: Wiper Blades
lift the wiper arm all the way up and out from the windshiled. hold the arm so it doesnt slam back down and crack the glass. rotate/spin the whole wiper blade 90 degrees, counter clockwise, and then pull the blade straight back off the wiper arm. install the new one in the opposite order
SOURCE: Wiring diagram of window wiper motor on 1994 Mercedes Benz 320
hello,can you post your chassis number,so i could help you regarding your wiper motor,because 1994 model have different version,ty
SOURCE: mercedes eclass
if you have fixed the problem there is two ways to reset the light the easiest way is with a code reader any auto parts store will usually read codes for free and will usually erase them as well if you dont have a reader. the second way is to remove the negative battery cable for about 30 minutes to reboot the ecu. if you have not fixed what turned the light on in the first place it will come back on though
SOURCE: How can I get my heater to blow on my feet to get
The heat will not come in before the engine is heated up a bit. You can shorten this period by pre-heating the engine in the cold environment.
SOURCE: 1984 Mercedes-Benz 300 SD
If you are certain that the fuse is okay, next replace the Multi-Purpose Relay/Combination Relay. This relay controls all three of those devices and is most likely your culprit. I would try the junkyard first and grab two just to be on the safeside. You'll find it under the fuse box cover on the driver's side engine bay.
92 views
Usually answered in minutes!
×