How does the black plastic license plate holder mount to the grill of my car?
You have no car shown here
Your owners manual shows that
Most factory kits come with the hardware to install it will be plastic push ins, bolts with j-nuts, or pointed hex head bolts. The push ins just push in line up the plate holder to the holes in bumper, if bolt and j-nut must slide j-nuts into slots then line up and install, if pointed bolts there are dimples that can be seen in bumper install at dimples, if no dimples just line up and install.
SOURCE: front license plate holder
yes its there if you dont find it drill some small holes and put the plate on that way
SOURCE: installing front license plate on 2008 300C
there is an actual liscence plate bracket u can buy at a chrysler dealership thats fits perfectly on bumber it has teeth that perfectly center the bracket right below the grill it looks great i just had one put one on my 2005 300
SOURCE: Replace front license plate holder
On my 92 ford pu, the plastic tabs snap into square holes in the bumper. They can be snapped out when there is no bolt in the hole by using a flat screwdriver & a little prying.
SOURCE: Front license plate mounting -- how to
well u will have to drill holes though the bumper and use the supplied screws that came with the kit u might have to use washers on both sides of the screws of the license plate but that should work for ya
SOURCE: how do I install my front license plate holder
just screw it into the bumper it wont hurt anything
241 views
Usually answered in minutes!
×