Question about 2007 Chrysler Pacifica FWD New Cars

1 Answer

2007 Chrysler Pacifica Touring Edition 4.0L. Trunk opens, but then immediately closes. Motor works when going up, but then drops as if they motor is not working at all. What could be causing the problem?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 578 Answers

Have your deaker check trunk model and motor

Posted on Jul 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a kill switch in a 2006 chrysler Pacifica touring


chrysler Pacifica have emergence cut off switchusually located in the trunk area, these are activated by either hitting something or being jolted..

Sep 29, 2016 | Chrysler Cars & Trucks

1 Answer

Jumped starter terminals 30/87, starter works but no crank when key turned on.


Click no start is typically a bad battery, bad starter, bad solenoid or loose dirty battery connections. But seems you have covered those items. Have you checked you negative battery cable where it attaches to the frame and motor? Use multi meter and check from positive of battery to the motor(block) for 12 volts. Also do this while turning key to start position. If voltage drops out when doing this double check battery voltage and all connections. If it does not drop then check the solenoid wire coming from ignition. When key in start position you should have a good twelve volts. If you you do then test the main leads hooked to solenoid for power. If solenoid wire from ignition has less than 12 volts double check connections at battery and also test the clutch pedal switch.

Sep 28, 2016 | 2007 Chrysler Pacifica Touring

2 Answers

2007 chrysler 300 power window relay location


Is the window motor getting power at the motor? Is the ground OK?

Jun 17, 2016 | 2007 Chrysler 300 Touring

1 Answer

I have a leak but it is not an oil leak coming from around where my oil filter is


Hi Anonymous, Spray degreaser around the leak then hose it off, run the motor to see where the leak is coming from and tighten or replace the part............CHEERS..

May 05, 2016 | 2007 Chrysler Pacifica Touring

2 Answers

Why does my 07 Chrysler Pacifica feel like its going to vibrate off the road with acceleration at 40 - 60 Mph?


2007 Chrysler Pacifica Problems, Defects & Complaints

www.carcomplaints.com/Chrysler/Pacifica/2007/
5 days ago - The 2007 Chrysler Pacifica has 97 problems & defects reported by Pacifica owners. The worst complaints are engine, transmission, and ...‎Engine - ‎TSBs 13 - ‎Crash Tests 2 - ‎Defect Investigations 2

Aug 03, 2015 | 2007 Chrysler Pacifica Touring

1 Answer

Chrysler pacifica trunk


You need to replace that latch, I think the return spring must be broken.

Jul 28, 2017 | Chrysler Pacifica Cars & Trucks

1 Answer

2007 chrysler pacifica touring water pump replacement


Labor time is1.8 hours dealer part is 239.00 not cheap

Nov 28, 2013 | 2007 Chrysler Pacifica Touring

1 Answer

Pacifica sunroof


I found that the grease had turned hard from age and stopped the motor from closing the window sort like it was over loading the motor. I cleaned out the old grease and spayed it down with WD40 and cleaned out the rest. It works as good as new now.

Aug 04, 2013 | 2004 Chrysler Pacifica

1 Answer

What is the correct sequence in bleeding a 2007 chrysler pacifica with ABS brakes?


Left rear, right front, right rear, left front. The way the Pacifica's brakes lines are plumbed, this is the correct sequence which is against conventional wisdom.

Aug 07, 2012 | 2007 Chrysler Pacifica Touring

Not finding what you are looking for?
2007 Chrysler Pacifica FWD New Cars Logo

Related Topics:

526 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8575 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...