Question about 1992 Ford Ranger

3 Answers

I have 92 ranger 5 speed manual transmission 2.3 4cyl. It is stuck in gear an won't come out of gear.

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

I had the same problem in my 95 150, I had to kick the shifter to get it into gear and home, the problem was that the shifting forks wore out and slipped out of place, replaced the forks, fixed the problem

Posted on Jul 01, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 31 Answers

In our race car we had the same problem, it turned out the shift cable decided to pull a fast one and cease, install a next shiftcable and that should cure your problem

Posted on Jul 01, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

I bet its in the linkege

Posted on Jul 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 92 ranger 5 speed is hung in gear. you can shift it out of gear but the transmission stays in gear. what is wrong?


i had the same problame in my 1989 ranger xlt 4x4 i speed shifted a trans that wasent ment to and my trans got stuck in second and wouldent come out had to take it somewhere to get the forks in the trans replaced turns out i bent the forks and it wouldent come out of second

Jul 11, 2014 | 1992 Ford Ranger

1 Answer

Transmission grinds when shifting into forth gear


The fork in the transmission is most likely bent.

Jul 02, 2014 | 1992 Ford Ranger

1 Answer

92 ford ranger manual transmision stuck in third gear


Hi Paula,may be your slave cylinder,check your clutch master cylinder's fluid,here's a guide.Here's where to check.

Mar 02, 2013 | 1992 Ford Ranger

1 Answer

Need to know what 5 speed transmissions will interchange with a 92 ranger with a 3.0


You didn't mention if it was 2 or 4 wheel drive so I went with a 2 wheel drive. According to hollander the 5 speed transmaaion fits a ranger (2WD) 1991 - 1994 and a Mazda B3000 1994 only. Hope this helps.....

Oct 29, 2012 | 1992 Ford Ranger

1 Answer

My 93 ford ranger 5 speed manuel is stuck in first gear what can I do to get it back into neutral and what caused this and what do I have to do to fix it


I would start by checking the oil level in transmission.Sticking in a gear usually means internal parts damage.This is usually caused by low oil because of plugs on the shifter cap leaking.There is nothing you can adjust or repair without removing and diassembling transmission.

Feb 09, 2011 | 1993 Ford Ranger SuperCab

3 Answers

What kind of transmission fluid for 2003 ford ranger manual 5 speed


DONT USE GEAR OIL IN A MANUAL TRANSMISSION. it will blow your seals out. the gear oil is too heavy and will block passages in the tranny

Nov 30, 2009 | 2001 Ford Ranger Regular Cab

1 Answer

Exhaust removal required to drop transmission on 92 Ford Ranger?


Yes you do. trust me you don't want to get that thing half way out and down and not be able to continue. Soak those rusted exhaust studs in a good penetrating oil over night. I bet they come right out. I would not recomend cutting the pipe.

Aug 27, 2009 | 1992 Ford Ranger

2 Answers

Transmission


The transmission is a 700r4 not really a size for this. what you probably mean is what gears are in the differential, these should be either 3.73 or 2.73 depending if manual or auto. (owner of a 92 rs with a 305)

Mar 26, 2009 | 1992 Chevrolet Camaro

1 Answer

Manual 5 speed transmission 1989 ford ranger


Try to see past the slave hose and bleeder to see if you can see the slave work. Could it be stuck in the depressed position? Have a helper push the pedal while you watch. I think your tranny is broke.

Jan 19, 2009 | 1989 Ford Ranger

Not finding what you are looking for?
1992 Ford Ranger Logo

493 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...