Did you check the pressure at the rail?
If the pressure is within range, check that there is a good spark at the plugs.
SOURCE: car will not start,but has spark and gas to fuel rail,plenty of pressure at fuel rail
You need a scan tool to go any further.
SOURCE: fuel and spark/turns over but wont start
you don't say if it wants to start, if it tries, if it does, maybe an issue with exhaust gas reculation system stuck open. OR dirty or clogged fuel nozzels.
SOURCE: 98 ford explorer wont start theft light on while
It sounds like the vehicle is in theft mode,did you use a different key? Does the theft light blink really fast with the key off?If the passive anti-theft system has been activated the computer will have to be reset in order to get the vehicle running again.
SOURCE: wont start
I have the same problem. There is an updated p.c.m. that controles the injecter pulse widthas at lower pulse. First replace your fuel filter(the check valve is stuck returning fuel back to the tand and letting minimal fuel to the engine. Next look at your coolant temp. senser and make sure it is not corroded it is vital that the senser give perfect input or the vehicle will run lean or rich. Try these before buying the updated computer. My truck run, great after i replaced these items, I know it is frustrateing it pissed me off because ther where no codes in the p.c.m. period
SOURCE: hi my ford focus rools over but wont start,i think
Try replacing the fuel filter. These sometimes can be instantly clogged with no warning.
36 views
Usually answered in minutes!
×