Question about Toyota Yaris

Open Question

Keyless entry does not work

I have a keyless entry system with remote starter. the starter works but the keyless entry does not. the lights flash when i press the lock or unlock buttons, but the car does not lock or unlock. The starter is an aftermarket, model rs623rn4 from accele

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 60 Answers

SOURCE: keyless entry won't work

Try changing the battery in your remote

Posted on Aug 11, 2008

  • 1 Answer

SOURCE: remote starter does not work but will unlock and lock doors.

You need to first press the LOCK button and then immediately hold down the START button for 2 seconds - voila!

Posted on Dec 20, 2008

  • 5 Answers

SOURCE: keyless entry won't work

I have a 1999 BMW E46 I have had a problem with the keyless entry myself. I brought the car to BMW Dealer and they told me that my Lock had an issue and that they need to repair some wiring wich would cost me $1,023.98 to find out that it was a fuse that burned out. I have replaced the 5 amp fuse with another one but it burned the fuse again so I put a 10 amp fuse and i have not had a problems since. In my car is fuse # 54 if Im not mistaken. But waht you can do is open the fuse box which is located in your glove compartment look for a diagram that shows you which fuse is where it will give you a fuse name a number where the fuse is located and how many amps fuse it is.

Posted on Dec 23, 2008

  • 65 Answers

SOURCE: Keyless Entry and Remote

I have had this problem take you drivers door put your key and un-lock from the out side with key (NO) then open the door push un-lock from the inside button and then set from you remote and it should set if not push un-lock then lock and then do the un-lock with the key. Let me know if that works. what my car did was locked from the inside and I had the problem were it would not work till I un-locked from the out side plus I had to go to radio shack and change the battery from the control.
Hope good happens.
Nikki2913

Posted on Dec 29, 2008

  • 1779 Answers

SOURCE: '03 Hyundai Elantra - Keyless entry remote not working

It wouldn't be the car battery, but since you just purchased the car, the dealership should correct the problem. Bring it to their attention right away. Did you get any kind of warranty? Most dealers have at least a 30 day warranty for things like this.

Posted on Apr 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reset keyless door entry that is in lock out mode


Viper Keyless Entry Systems

https://www.viper.com/car/keylessentry/
Viper is the industry leader in keyless entry systems. Add the convenience of keylessentry to virtually any vehicle - even vehicles without power door locks!

Alarms, Remote Car Starters, Keyless Entry & Locks - JC ...

www.jcwhitney.com > Audio, Video & Electronics
20 out of 32 products in Alarms, Remote Car Starters, Keyless Entry & Locks ..... ofKeyless Entry & Car Alarms allow you to lock and unlock power door locks.
How to program your keyless entry keypad - Ford Ownerhttps://owner.ford.com/.../locks.../how-to-program...Ford Motor CompanyDiscover how to lock and unlock your doors and how to program memory settings that will adjust seats & mirrors for each driver.SecuriCodeā„¢ Keyless Entry Keypad - Ford Ownerowner.ford.com/.../locks.../securicode-keyless-entr...Ford Motor CompanyLearn how to set a 5 digit SecuriCode on the Ford keyless entry keypad. ... Sign out. Register/Sign In Ā· Your Vehicle. Service & Maintenance. Service & .... vehicle's SecuriCode keypad to lock and unlock your doors without having to use a key. ... Thekeypad will go into an anti-scan mode if you enter the wrong code seven ...How Programming Your Keyless Entry Can Make ... - Ford Life

Jan 08, 2016 | Cars & Trucks

1 Answer

Can a remote start be installed in a car with NO KEYLESS ENTRY? no alarm system...just a key to open doors


Yes. After market remote start kits don't care about keyless entry or alarm systems. You will get a separate key fob to operate the remote starter.

Jan 04, 2016 | 2001 Hyundai Elantra

1 Answer

Remote keyless entry not working


This could be as simple as needing new batteries. I would start there. The next would be the programming of the module. That will require the manual for you individual vehicle. If those both check out it could be the send receive unit in your car that has gone bad or the remote itself went bad on that one function. You can do some of this yourself but ultimately the company that put it in should trouble shoot this for you without cost.

Nov 21, 2012 | 1999 Oldsmobile Silhouette

1 Answer

I have a 2008 Pontiac G6 and it came with a remote keyless entry and remote start and the remote start is no longer working. When I try to start it the lights flash and the dash lights come on but it does...


I think that the module for the remote start is bad, possibly the connection to the starter circuit is bad.

I would take the vehicle to an auto electric service shop in your area that installs remote starters to diagnose and repair the problem.

Oct 13, 2010 | 2005 Pontiac G6

2 Answers

2007 cobalt remote starter opens doors but does not start car


Ok help me understand this. When you say "remote starter" are you refering to the Keyless Entry remote. Assuming your car is equipped with remote start from the factory, if you check engine light is on the remote start is disabled. Is your check engine light on? Do you have multiple Keyless Entry remotes? See if the other one works if you do? It is possible that perticular button on that remote is not working while others are working. You will need to replace it at a dealership.

Feb 07, 2010 | 2005 Chevrolet Cobalt

2 Answers

Purchased used. have remote for keyless remote.


That you need to take it to a car stereo dealer that install NEW keyless entry's...Sorry, thats the easiest way to fix this issue.

Jun 14, 2009 | 1999 GMC Jimmy

2 Answers

My remote for the keyless entry does not work.


does trunk button work? panic button?
here's 2003 info:


  • The doors do not lock/unlock using the remote transmitter
  • Remote transmitter.
  • Driver door module (DDM).
  • Go To Pinpoint Test G .

SECTION 501-14: Handles, Locks, Latches and Entry Systems 2003 Town Car Workshop Manual
GENERAL PROCEDURES Remote Transmitter Programming
  1. Cycle the ignition from OFF to RUN four times within three seconds. The locks will then lock and unlock, confirming that the program mode has been entered.
  1. NOTE: When the first keyless entry remote transmitter is programmed, all other keyless entry remote transmitters are erased.
    Press any button on the transmitter to be programmed.
  1. If additional keyless entry remote transmitters are to be programmed, repeat Step 2 within 7.5 seconds.
  1. To exit program mode, turn the ignition to START or wait 7.5 seconds.
--------------------------------------------------------------
report back

Mar 22, 2009 | 2004 Lincoln LS

1 Answer

Keyless entry not working


Try re-programming the remotes, here is the procedure for your car.
JAGUAR
XJ8 Remote Control Programming
1. Unlock the trunk with key.
2. Turn Ignition on.
3. Warning light on dash comes on.
4. When they go out, lift arm rest, inside their is a valley button, Press 5 times within 5 secs of lights on dash going out, Horn & Lights Flash.
5. Press any button on remote, remote programmed

Dec 11, 2008 | 2006 Jaguar XJ8

1 Answer

2007 jeep wrangler sahara with a mopar remote starter just beeps


That's not a remote starter on your key chain, it's a keyless entry for an alarm system.

Nov 17, 2008 | 2007 Jeep Wrangler Unlimited Rubicon 2...

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...