Question about 2003 Oldsmobile Alero
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
May 03, 2016 | Cars & Trucks
Sep 25, 2015 | 2011 Chevrolet Equinox
Turn on the Durango and check each of the four turn signals
to make sure that the bulbs are not burned out. If you find one that has gone
out, replace the bulb and retest the turn signals. When a bulb goes bad on this
circuit, the resulting operation can mimic a bad flasher or one that is
Locate the combination turn signal flasher and relay. It is
on the left end of the driver's dash. Open the access door and view the
collection of relays and fuses. At the left side of the mounting block is a
larger flasher and relay. This is the combination turn signal flasher and
the relay by placing you finger on the relay housing and activating the turn
signal. If you have found the right one, you should feel a clicking as the turn
signal blinks. Remove the relay, replace with the new relay and close the
Start the Durango and activate the turn signals to check that they each work. The light should turn on and should blink. Also, check the hazard lights to make sure they work.
Feb 11, 2012 | Dodge Ram 1500 Cars & Trucks
Apr 21, 2010 | 1995 Oldsmobile Aurora
Dec 05, 2009 | 1995 Nissan Pathfinder
Aug 12, 2009 | 1989 Lincoln Town Car
Sep 28, 2008 | 1993 Buick Century
186 people viewed this question
Usually answered in minutes!