Question about 2000 Ford Taurus
Wont shift into overdrive
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Your overdrive should kick in at about 45mph, pretty much at or about 2000rpm. To see if it engaged, lightly touch the brake pedal and it will disengage.It should also disengage when you mash the pedal down to go into passing gear, and re-engage when conditions "normalize" again. You can tell that it has engaged because the tach will drop a few hundred rpms. If it's not doing this, a simple trans oil change (with filter) may correct the problem. OD is activated by a shift solenoid on the valve body that may be a bit gummed up.
95's show a shift control module on some diagrams I've seen, but not on others. I read this as a possible "half-year change" So you may or not have one. If you do, I'd check that as well!
Posted on Jan 02, 2009
some of the trannys has straps in them that sometimes needs to be tightened and that could be the cause of it
Posted on Mar 24, 2009
Solenoid pack in trans. Position module,is just that. Wrong guess. What tran model do you have? You also have other sensors to consider but have to know the trans your working on and the computer and shift stratagy involved to solve this,even if your throwing parts at it.
Posted on Feb 06, 2010
sounds like an electrical problem with the transmission ...these transmissions are fully electronic and the gears are engaged by servo valves these are controlled by the computer.... if there is any problem with the engine or a few other things it will be put into safe mode and it wont engage overdrive ..it may need to be scanned to see if any codes exist in the auto trans ecm..
Posted on Feb 09, 2011
Tips for a great answer:
Jan 25, 2016 | Cars & Trucks
Aug 30, 2015 | GMC Cars & Trucks
Aug 18, 2012 | 1996 Ford Taurus
Aug 04, 2012 | 1998 Ford Taurus
Aug 28, 2011 | 2000 Ford Taurus
Feb 06, 2010 | 1997 Ford Taurus
Mar 24, 2009 | 2000 Pontiac Grand Prix
227 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: