Already changed out crank and map sensor
SOURCE: 2002 Chevy Trailblazer Engine Codes
This is actually an easy swap out. Remove the electrical connection, remove the retaining bolt and pull out old one. I believe the sensor is located in the front passenger side of the engine on this particular model.
SOURCE: 2004 Chevy Trailblazer radio and CD player works, but no sound
if you have installed a new cd player in there then the propblem could be that your speaker wires and either touching each other or grounding them selfs out.. pull of the cd player and check to make sure all the speaker wires are covered properly and no bare wires are exposed.. if you still have a factory cd player in it then you will probably need to take it to a dealership to have it checked out..
SOURCE: trouble code P0105 continues to set on 2003 chevy trailblazer
If you have bearing problems MAP sensor codes are the least of your worries. Check on the cost of getting a new engine. I hope this is not the problem. Good luck Moe
SOURCE: I own a 2002 Chevy Trailblazer with 4200 vortec
Do you know if the plugs were changed, a bad or broken plug will also cause rough idle and slow acceleration?
272 views
Usually answered in minutes!
×