Question about 1999 Isuzu Hombre

2 Answers

I have a 1999 Isuzu Hombre. I guess this is kind of silly but I would like to know how to change it myself. Women tend to get totally scammed in South Texas. Where can I learn?

Posted by on

  • metalbrains2 Jul 02, 2009

    Hahah wow I totally forgot. I want to learn how to change my oil! :)



2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 161 Answers

It is not silly First buy a manual from a parts store There should be a bolt on the oil pan don't strip it when you take it out that is the oil drain plug once it is removed the oil will drain. the filter must be change at the same time buy an oil filter wrench and a new filter all parts stores have a book with the right part number for the oil filter. Buy the right amount of oil the manual will tell you how much oil you need, replace the filter first, replace the drain plug put the oil back in do not over fill check the dip stick several times to make sure you do not go over the fill mark, after you have replaced the oil start the vehicle to get the oil into the new filter shut off vehicle and check for leaks around the drain plug and filter no leaks you did a good job. good luck

Posted on Aug 30, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 400 Answers

What do you want to know how to change?

Posted on Jul 01, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to install a serpintene belt on 98 Isuzu hombre

or v6
must be the V6 as the I-4 is OHV chain
the V6 is covered
the 8th digit of the VIN answers this
4= 2.2L 4 cyl. chain cam OHV
w= 4.3L v6 ,chain
x= same but tad diff, v6. chain
there is no belts this year.
yes confusing
its not really an ISUZU with belts
its a CHevy S10, with a silly Isuzu badge

Jan 12, 2017 | 1998 Isuzu Hombre

1 Answer

99 isuzu rodeo where are the rear wiper relays

one more silly easter egg hunt, seems that is all we get.
and guess what most cars have no such thing.
ill pretend you did say that, and said
"my rear wipers are totally dead. why." HARK A REAL QUESTION.?
A fuse blown.
marked rear/wiper washer 10 amps.
there is no relay have schematic here.

poof i the pudding.... below.


Apr 10, 2016 | 1999 Isuzu Rodeo

1 Answer

I want isuzu hombre 1999 bcm wiring dirgram and color code

BCM, the body cont. module?

what country, cars are made by country and are wired by laws for their country. and what engine option.?
what dont work right? just a clue to get in right page, would help 100%

if in uSA> has this. log in and look, or tell more....

Apr 30, 2014 | 1999 Isuzu Hombre

1 Answer

99 Isuzu hombre slave cylinder

The slave cylinder would be connected to the clutch arm in the bell housing.

Aug 08, 2012 | 1999 Isuzu Hombre

1 Answer

Torque specs and valve lash for 1999 isuzu hombre 2.2l 4cyl

Get all those specs, complete electrical and all mechanical data:
'99 Hombre service manual

Aug 04, 2011 | Isuzu Hombre Cars & Trucks

2 Answers

1998 isuzu hombre 4X4 4.3 shift hard

Excessive throttle pressure can cause this. Input to the trans is controlled by the computer, but influenced by speed sensors and throttle position sensors. It could be in the valve body as well so you will want to get someone with proper equipment to check it. If you get an expensive estimate, get a second opinion.

May 18, 2008 | 1999 Isuzu Hombre

Not finding what you are looking for?
1999 Isuzu Hombre Logo

Related Topics:

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts


Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14411 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides