Cars & Trucks Logo
A
Anonymous Posted on Aug 12, 2014

2008 jeep commander interior lights stay on and door open warning stays on when door is closed. also window will not work.

When you open the door and get in and close the door ,start the engine, all doors closed , the door open light stays on , interior lights stay on and the passenger window will not operate..

1 Answer

Wally Jackson

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Cheetah:

An expert who has answered 20 or more questions within one hour.

  • Expert 94 Answers
  • Posted on Aug 13, 2014
Wally Jackson
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Cheetah:

An expert who has answered 20 or more questions within one hour.

Joined: Feb 28, 2013
Answers
94
Questions
1
Helped
73006
Points
239

The Pin switch on the door is bad check it and repalce

4 Related Answers

Anonymous

  • 115 Answers
  • Posted on Mar 09, 2009

SOURCE: 99 Jeep grand cherokee...interior lights, door locks, pwr windows

The wires that go into the doors has probably broken from opening and closing the doors.They run though a rubber boot where the hinges are. Check all the doors wires. This is a common problem and i have fix many jeeps with these problems.

Ad

Anonymous

  • 54 Answers
  • Posted on Oct 23, 2009

SOURCE: All the buttons on the driver door do not work.

That thing has a factory security moduel that all that runs through and is most likely bad and will need replaced.

jamie

  • 1810 Answers
  • Posted on Jan 01, 2010

SOURCE: Interior lights stay on, driver side door panel

counds like dirty contacts in the door frame

alicantecoli

Colin Stickland

  • 22516 Answers
  • Posted on Nov 14, 2010

SOURCE: windows not working interior lights staying on and

check the switch in the door pilar

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

I have a 2003 ford tauraus and when i start the car my interior light stays on and the door ajar pops on with all the doors closed and car running and then it does it after i get out the car it goes out...

That is because the switch is faulty and is not operating when the door is closed.

Hence the interior light stays on(unless you switch it off manually) and the warning system thinks the door is still open because the switch has not been activated and therefore the open door warning appears.

Hence you need to have the door operated switch replaced.
1helpful
1answer

Interior lights staying on causing dead battery. also interior lights flash off and on when driving

Inside the door jamb is a little plunger the it pushed in when the door is closed. It sounds like it is not working properly. If it was working properly it turns on the interior lights when you open the door and turns them off when you close the door. Hope this helps.
0helpful
1answer

Warning light comes on but hatch is not open 2006 jeep Commander

Removed both battery terminals overnight to allow a reset. I had done that already but not long enough for a reset
2helpful
1answer

99 Jeep grand cherokee...interior lights, door locks, pwr windows

The wires that go into the doors has probably broken from opening and closing the doors.They run though a rubber boot where the hinges are. Check all the doors wires. This is a common problem and i have fix many jeeps with these problems.
0helpful
1answer

2001 Jeep GC Laredo - Interior Lights stay on while driving

Sounds like a fuse issue. check your panel for popped accessory fuse.

the overhead light issue may be the door close switch
4helpful
1answer

Interior lights stay on and all power windows inop

I had the same problem.....there is a rubber boot that covers the wires going from your door to the body of the car.... the heavier gage wires eventually crack from the opening and closing of the door....you need to cut the rubber and get to the wires inside and splice them back together....the first time i had this problem my windows did not work...then a few months later my interior lights would not go out....different wire this time ...easy fix....
0helpful
1answer

Power windows dont work and the same problem with the power locks

the harness that is between the drivers door and the "a" pillar probably has some wires broken.
Not finding what you are looking for?

1,768 views

Ask a Question

Usually answered in minutes!

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...