Question about 1994 Chevrolet Cavalier

2 Answers

Need help with belt problem on 94 chevy cavalier

I need to replace the belt tensioner on a 94 chevy cavalier,how does it remove from the aluminum plate it's attached too? i've tried 2 new belts and they keep slipping off,i'm guessing the tensioner is worn or bad.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

  1. Disconnect negative battery cable and remove coolant reservoir.
  2. Remove serpentine belt. Refer to Drive Belts, Mounts, Brackets and Accessories / Drive Belt. See: Drive Belt\Service and Repair
  3. Remove two generator bolts.
  4. Remove power steering pump and position aside.
  5. Remove tensioner bolts and tensioner.
  6. Reverse procedure to install, Torquing tensioner bolts to 37 ft. lbs.

Posted on Jun 30, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

They do unscrew. They turn in opposite direction that the tensioner is applied. There is a gromet inside attached to rubber that flexes when pressure is applied

Posted on Jun 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Serpentine belt tensioner replacement


looking at diagram 2.2l engine to remove belt tensioner held in place by two bolts dont remove center bolt to tensioner just the two side mounting bolts one on each side.

Nov 19, 2013 | 1999 Chevrolet Cavalier

1 Answer

How to tighten the altanator belt on a 1983 chevy cavalier


It's alternator. Do you have a serpentine belt or seperate belt. If seperate, there are two bults on the alternator. Loosten both but do not remove. Take a prybar and pry back on alternator. Have someone hold the prybar while you tighten or hold yourself and tighten. If you have a serpentine belt, you need to replace the belt tensioner. The spring is weak inside the tensioner. It's 30 years old. remember that.

Jan 25, 2013 | 1983 Chevrolet Cavalier

1 Answer

94 chevy cavalier 2.2 belt come loose on it on it hard to steer how you change the belt tensioner ?


take off belt, take out center bolt,and put a new one on,make sure you have the belt routing.

Nov 19, 2012 | Cars & Trucks

1 Answer

How do i replace the tensioner pully on my 1996 chevy cavalier


It's pretty easy take the serpenten belt off if it has a motor mount on top of the serpenten belt you will have to jack up on the motor on the right side to releive the pressure on the mount remove the mount and tensioner should be a 13 or 15 millimeter bolt remove install new one put serpentine belt on then motor mount good to go thanks.

Feb 28, 2011 | 1996 Chevrolet Cavalier

1 Answer

How to change a serpenteen belt on a 94 chevy cavalier


you need a long 3/8 wretched with long handle the tentsioner that is located under the power steering pump has a hole that the wretched fits into you take the tension out and pull the belt out ;




note berry important to see the way the belt is warped o round so u can put it back

Nov 04, 2010 | 1994 Chevrolet Cavalier

1 Answer

How to change door handle on 94 chevy cavalier


you must pull the door pannel, with the window up you will see 2 bolts on the inside remove the latch rod first then the bolts !!

Mar 01, 2010 | 1994 Chevrolet Cavalier

1 Answer

1992 chevy cavalier serpintine belt how do i loosen it


To replace the belt push (rotate) the belt tensioner and remove the belt. Use a 15mm socket on the 4-cyl. engines and a 3 / 4 in. open end wrench on the V6 engines.

Apr 08, 2009 | 1992 Chevrolet Cavalier

2 Answers

Serpentine belt keeps coming off my 1992 Chevy Cavalier


Hi Chris. I would check all the pulleys with the belt off and make sure the alternator, ac pump, power steering pump are all turning fairly easy and that the pulleys havent come loose and started wobbleing alittle.

Mar 15, 2009 | 1994 Chevrolet Cavalier

Not finding what you are looking for?
1994 Chevrolet Cavalier Logo

487 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...