How to replace sun visor on 2006 cadillac sts

SOURCE: cadillac allante sun visors (2

GM uses bent metal clasps to secure the visor position. If you are mechanically inclined you can buy buy new clips for roughly $10 and install them yourself or do what I would do which is remove what is there is gently bend them back to an oval vs the circular shape they have now. There should be two philips head screws holding the assembly. Remove the two screws (per side) an slide the visor off the mount to reveal the metal clasp. Should you have any questions simply reply back and I will do my best to help.

Good Luck

SOURCE: replace power steering pump and lines 1992 cadillac seville sts

you need to have a pulley puller to get the pulley off if you don't have one most auto zone part stores have a loan a tool program and they can help you with that on most powersteering pumps the high pressure line will be a fitting or bolt on and the return line is usually just a squeeze clamp hope this helps good luck

SOURCE: sun visors

I just fixed this same problem on my 1993 Toyota Camry.

First, I tried velcro, but in the hot weather the glue wouldn't hold to the fabric so the fix only lasted about 6 months.

Just now I gerryrigged a black office paper clip - the big kind with the black clip attached to two big silver metal hands - to the visor and metal arm.

Magic, it's fixed, and for free.

Johnny Brown

• 5763 Answers
• Posted on May 12, 2010

SOURCE: where is the oil filter located on a 2006 sts

the oil filter is not a regular looking filter, its a cartriage type that goes into a housing, if you open the hood and look on the driverside of motor near the oil fill cap you will see a cover cap with a nut shape head on top, use a 24mm socket on a rachet and unscrew the cover,then pullfilter out, install new filter and replace oring provide with filter on the cap. hope this helps.

Testimonial: "This was great. I found it immediatly."

SOURCE: how to change a headlight on a 2006 cadillac sts

To remove the headlight assembly you need to remove the front bumper cover. There are two bolts and one stud with a nut that hold the headlight in. Two of the fasteners are behind the bumper cover.If you remove these the headlight must come out.