Question about 1999 Volvo V70

1 Answer

Windows controls on driver's side don't always work, leaving windows usually down. Cannot raise passenger side using passenger control either. Buzzing sound heard from driver's control when trying to activate. Checked for obstructions but none found. Control has worked again after a while enabling windows to be shut, but takes longer every time and is not reliable

Posted by on

  • skieasy Jul 21, 2009

    Fitted a new switch pack (from e-bay, cheaper than breakers!) and everything fine again. Thanks for helpful advice.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 20 Answers

Volvos engineers had the brilliant idea for placing theese switches in the door, without thinking of the poor construction of the roof.
You probably have had them filled with water several times, but the switches wont have this water....
I would have bought some wind-visors available on several car-equipment shops, and a new set of switches for the windows.
The buzzing you hear is most likely electric buzzing on the contacts of the switches.

Posted on Jul 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Passenger power window stopped working with either controls


Power Windows not working - CarGurus

www.cargurus.com > Questions > Honda > Accord

CarGurusOct 9, 2012 - Power Windows not working - I have a 2006 Honda Accord and thepassenger and back power windows quit working all at once. ... My key less entry doesn't work either after I replaced the master Window control unit. 6 out of ...

Passenger Power Window Not Working ' ClubCivic.com - Your Online ...

www.clubcivic.com > ... > Interior / Audio / Electronics
Oct 28, 2009 - My passenger side window is not responding to either the driver side orpassenger side switch. It is in the up position and wont go down.

Jan 19, 2016 | Cars & Trucks

1 Answer

Front windows struggle to close and back window doesn't want to close


Power windows stopped working. : Hyundai Elantra ...

repairpal.com > Problems > Hyundai > Elantra
Hyundai Elantra power windows goes down , but does not want to go up. ... Now I can only open it using the drivers side control and close it using only the passenger side control. ... Just the rear passenger window doesn't work. ... All of the windows in the car except the front driver side window had stopped working.

How To Fix A Slow Power Window - YouTube

? 2:32
www.youtube.com/watch?v=BRi5Wq1OgmY

Mar 7, 2011 - Uploaded by Nthefastlane
Click here: https://rdy.cr/f7a3a1 How to fix slow power windowsthat get ... technician finds the true problem. that doesn't mean every mechanic is a ... Like it shifts towards the front of the car and leaves a 1/2 inch open .... I have an 09 Toyota Rav4 and had a little shutter on the last 1/4 of the window closing.

Oct 24, 2015 | 2005 Fiat Siena 1.6

1 Answer

2003 cadilac deville driver window off track. motor seems to work but window will not go up.


Window regulator is bad in the drivers door . Do you know what a regulator is ? The Trainer 24 Power Window Troubleshooting Do you know anything about automotive electrical testing ? How to read an use a wiring diagram ? Do you know there are two side to a electrical circuit ? B+ voltage an a ground side . Plus there is electronic control modules and class 2 serial data network involved . When you push the switch for a window othen then drivers window on the drivers door . a class 2 message is sent to the other doors modules . The correct module will then open it's window .
http://www.bbbind.com/free_tsb.html Check out free wiring diagram here .Enter vehicle info . year , make , model and engine size. Under system click on body & accessories , subsystem click power windows . Click search button , then click each link one at a time .

Mar 27, 2017 | 2003 Cadillac Deville

2 Answers

Hyundai ix35 2012 window lock stuck. passenger window half down and cant get it to move up or down


Before you replace anything, inspect the connector pins in both the driver's door switch and the passenger door switch. If you don't find any problem with these connector pins, replace the driver's door control switch.

Sep 12, 2012 | 2011 Hyundai ix35 2.0

3 Answers

The drivers side window switch will not control the passengers window. What's wrong?


Most likely burnt contacts in the door switch.
The switch can be carefully levered out of the door trim with a flat blade screwdriver , unplug the loom and carefully pry the switch apart with a flat bladed screwdriver. ( Do it somewhere clean and easy to find escaped springs and ballbearings, like on the kitchen table) .
Inside the switch are a series of rockers with contacts at either end. Clean up the contacts with some fine sandpaper.
Reassemble.
These instructions assume that the passengers window still works using the passengers side switch.
Good luck

Apr 06, 2010 | 2005 Toyota Avalon

1 Answer

Same prob with my 1997 V70 estate windows.


COULD BE ONE OF THREE PROBLEMS: BAD MOTOR, THE WINDOW IS OFF TRACK, OR YOU MAY HAVE A SHORTAGE.

Jun 25, 2009 | 1999 Volvo V70

1 Answer

96 Camry Power Window problem


the power windows of most toyotas only works if the master switch located on the drivers side is good. remove the master switch check for burned traces on the printed circuit board. solder a jumper wire across the burned part and it should work

May 30, 2009 | 1989 Toyota Camry

1 Answer

2003 F250 Power Windows won't work


check fuses 35 & 41 (10 amp, red).
it also shows an accesory delay relay in the fuse panel.
And fuse 601? 30 amp.

make sure you don't have lock-out on driver switch panel activated.

Power Window System
Features and Operation
NOTE: The accessory delay feature will allow power window operation up to 10 minutes after the ignition is off or until a door is opened.
If equipped with power windows, the window control switch (14529):
  • will operate the power windows only when the ignition switch is in the RUN or ACC position.
  • is located on each front door trim panel, and Crew Cab and Excursion rear door trim panel.
  • may be used to raise or lower the driver side, passenger side and rear windows from the LF control on the driver side, or the passenger window from the passenger switch.
  • includes a one-touch down (OTD) feature for the driver door window.
  • can partially lower the driver side window when the LF window control switch is depressed half way (first detent).
  • will completely lower the driver side window when the LF window control switch is fully depressed and then released (second detent).
Power Window System — Modes of Operation
There are two modes of operation for the power window system.
Manual Mode
When the LH window control switch is pressed to the first down position, the window will move down until one of the following conditions are met:
  • The LH window control switch is no longer in the first down position.
  • The LH window control switch is pushed to the OTD position, causing the windows to enter auto mode.
Auto Mode
Auto mode provides the OTD feature. The OTD feature is activated when the LH window control switch, for the LH window, is pressed to the second down position.
Auto mode will be terminated when any of the following conditions are met:
  • The LH window control switch is pushed to the UP position.
  • The LH window control switch is released (OFF position) and then moved to the DOWN position (first detent) or OTD position (second detent).
  • Note: Delayed accessory feature must be active.
The OTD feature is controlled by the window control switch.

---------------------------------------------------------
Condition Possible Sources Action
  • All power windows are inoperative
  • Fuse(s).
  • Circuitry.
  • LF window control switch.
  • Accessory delay relay.

May 23, 2009 | 2003 Ford F250 Super Duty Crew Cab

Not finding what you are looking for?
1999 Volvo V70 Logo

333 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...