At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Disconnecting the battery makes the anti-theft module and the ECM lose its memory and pairing. The security system just needs to be reset, but apparently it has a code. Your best bet may be a local auto locksmith or an auto-electrician.
i have a problem with my rover 414i year 1995 in the moment that i put the radiator cable in the heat cartridge the motor loses engine and turns off automatically. Please help me
If, when you switch the ignition on, you get a dash light on, the symbol is a car with a key overlaid, you have somehow activated the immobilser You could try disconnecting and reconnecting the battery, this may reset the immobiliser, If this does not work you will have to contact a Hyundai dealer to get the immobiliser unlock code.
There is a way to override the code, however you need the code number. The only other way is to sit in car with door shut, play with the central locking button on dash, locking and unlocking. While doing this occassionally turn the ignition on and off. If you do it long enough, you may find the immobiliser light goes out, if it does, quickly start the car.
After ages searching finally found this on the Cobra site....
A8510 KEY PROGRAMING
Ensure the immobiliser is disarmed :-
1) Switch the ignition ON and OFF three times then back to the ON position
within seven seconds.
2) The LED on the dashboard will light up signaling the unit is in programming
mode.
3) Touch an already programmed key onto receptical, the LED will extinguish
for one second
4) Repeat step 3 for all other keys (Max of 4 touch keys)
5) To exit programming switch off the ignition key (unit will automatically exit
programming after four keys)
NOTE :-
1) Programing procedure can only entered with the system disarmed.
2) If all keys have been lost the system will need to be replaced
×