Question about 2000 Ford Contour

2 Answers

Check engine light is on and it hesitaes

Check engine light has come on and when start to go it will **** whe get it up to 50 or60it will run pretty good but it will ****

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 708 Answers

Could be an oxygen sensor causing the fuel mixture tobe incorrect. Take it to an auto parts store ad they will help you testit for free.

Posted on Jun 30, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Ford Master
  • 3,854 Answers

There are to many things to looks for but the check engine light indicates what the issue is to the problem. If there is a Auto Zone around your area, have them scan the car for DTC codes so we can address the issue with out spending more money then we should. Auto Zone scans free of charge and what ever parts need to be replaced, they can give you the step by step instruction to get the job done. Good luck and keep me posted. 

Posted on Jun 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Real up and reving in park fast idle in drive


motor revving - CarGurus

www.cargurus.com > Questions > Chrysler > Town & Country

CarGurusDec 28, 2012 - motor revving - Sometimes the motor revves up and the light go dim on... If in park it takes alot of rev. to make the pop sound. ... 1996 chrysler cirrus change a bad fuel injector and now the engine revs ... Used Nissan Quest".

Idle issues... cold runs great... after warms up it hesitates ...

forums.nicoclub.com/idle-issues-cold-runs-great-after-warms-up-it-hesita...
Feb 20, 2009 - TYC 800107P Nissan Altima Replacement Cabin Air Filter ... when i go to park the car and throw it in park it goes up to like about .... If I leave it in drive when the idling starts to hesitate it tends to make the car jump forward.

All Questions and Answers for Nissan Repair - AllExperts.com

en.allexperts.com > Autos > Auto Repair

Jan 13, 2016 | 1996 Nissan Quest

2 Answers

1997 Prism LSI. It cranks, but why won't it start?


redux 2
not car smart ?
and no photo of your ENGINE so we both fail
hard.


crude video, but is for folks with near zero tools
or shows you clearly why you dont want to do this.

https://www.youtube.com/watch?v=064Ilsz8Fzg&NR=1&feature=fvwp

so get car fixed
use a real mechanic.
see why?

the DIS engine started in July 1997 (mfg,date)
http://www.fixkick.com/PRIZM.html

facts.
so your does have a distributor (google that please)
but 1997 is also a big change, a new engine
end to end. july 1.

no photo of your engine,means NO JOY.
we can not guess engines
or what spark system used due to huge changes
in 1997, all related to USA smog laws.
fact.

Dec 14, 2015 | Geo Cars & Trucks

1 Answer

What would cause the car to hesitae when starting


If your starting problems occurs after a 5-30 minutes stop when the engine is still warm it might be the injectors leaking/ dripping. The gasoline is causing the mixture inside the manifold to be way too Rich untill it has evaporated.

Oct 09, 2014 | Cars & Trucks

1 Answer

Battery barely starting car, engine only rev to 2500 rpm


Loose or corroded battery cables, Loose fan belt not turning alternator fast enough, Bad alternator, check the battery with a Voltmeter, voltage with engine stopped. should be slightly over 12V Start engine and check again.. shoiuld be over 14V. this is if the alternator is putting out a charge. Chech the output at the alternator. the BATT connection. usually a larger red wire. should be 14V+ with engine running. Since the A/C works fine with the engine running.. I would have the battery checked.. sounds like bad battery.

Jun 02, 2014 | 2008 Kia Optima

2 Answers

Obd2 port not working 1999 toyota sienna


Run for 3-4minutes thn turn off n disconnect nevative battary lead 4 5minutes thn connect nevative battery lead n try tht 50-50

Apr 01, 2014 | 1999 Toyota Sienna

1 Answer

Engine doesn't run. Suspect fuel issue. 2005 Grand Caravan.


No codes, but it was communicating? If no codes, it could be fuel pump. Have the fuel pressure checked. Do you hear it turn on for a couple of seconds, with key in on, not start? It should turn on briefly to pressurize the fuel lines and system. With key on, pressure should be pretty high, usually about 50 psi for MPFI.

Dec 29, 2013 | Dodge Grand Caravan Cars & Trucks

1 Answer

The car wont start whe have already recharged and tryed to start and it still wont start the lights come on on the dash but it dosent do anything


This is a generic answer: Assuming that the engine starter turns and cranks the engine; it could be a fuel system related issue. Start by looking into these areas: fuel filter / fuel pump / injectors. Check for open / blown / missing fuses, and if it has been in an accident, some models have an "inertia switch" that is designed to cut power to the fuel pump after being bumped hard. You'll have to locate it and reset it if it has been tripped. Many cars with electric fuel pumps run when the key is inserted and turned to the run position. If you have someone crouch down near the gas tank when you first turn the key from off to run, they might be able to hear the pump run. It will run for a few seconds and shut off - unless the key is turned to start and the engine is runs.

Mar 26, 2012 | 2005 Chrysler 300

1 Answer

Thermastat light on needle indicating car hot.


Check your fluid levels whe car is cold fill resevoir with 50-50 mix antifreexe

Oct 08, 2010 | 2000 Cadillac Catera

Not finding what you are looking for?
2000 Ford Contour Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...