Question about 1989 Isuzu Trooper

1 Answer

99 isuzu trooper 3.0d will go into every gear, but will not drive, it jumps at first then moves slowly before stopping any ideas?? same in 4h and 4L

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 235 Answers

Sounds like the Dual Mass flywheel has broken , you have to drop the box out to see it though .

Posted on Jul 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why trasfercase does not transfer from 4LLock to 4HLock or 4H when changing the mode??


Perhaps the gear trains are 'in a bind' and the electric/vacuum actuators cannot exert enough force to shift them.

Try driving at slow speed in a straight line on soft surface (not concrete) for 100 feet, then back up in straight line. The idea is to allow any residual loads from the LOCK position to dissipate and unload the shifters.

Sep 13, 2014 | Cars & Trucks

1 Answer

4L and 4H lights flashes when you try to engage either of them in 05 Isuzu Rodeo


this is a part time 4wd, not AWD.
and as such must not be run on dry ice free pavement.
so post if car is on said pavement.
test 4wD in DIRT, does it work now, or not?
if you keep doing it on dry pavement this happens.
see here
http://www.rubicon-trail.com/4WD101/driveline-bind.html

read the wiki on all system. and see what you can do and can not.

its not AWD, and has no CENTER differentiable gears.

Apr 18, 2014 | 2004 Isuzu Rodeo

1 Answer

Suzuki grand vitara 2010 normal driving 4wd position


normal driving 2h if using 4wd use 4h to drive on roadway 4l is a lower gearing that is usually used to get thru something slowly than if try to drive normal in low can damage motor or transfer case read ur manual it explains how and when it is advisable to use ur 4wd

Mar 31, 2014 | 2007 Suzuki Grand Vitara 4WD

1 Answer

I now have a suzuki samuri and do not know how to use 4x4 gears


Using the shorter gear leaver in the samurai, the gear choices are arranged in a simple U fashion. They are arranged in sequence. At left top, bottom, right middle and right top you have 2 high(2H), 4 hight (4H), neutral(N) and 4 low (4L).
2H- Engages rear wheel drive only.
4H- Engages all wheels in 4X4 mode.
N- Disengages all wheels (if you gonna tow your vehicle)
4L- Engages all wheels in 4X4 mode with 50% more torque but you cut your top speed by an equal amount.
If you have the OEM gear knob the diagram of the layout of the transfer box should be imprinted. 2 high should be used on dry and mildly wet paved roads. Using 4L or 4H in these conditions may result in damage to your transfer box. You may use 4L or 4H in any other road conditions.

Jan 05, 2013 | 1987 Suzuki Samurai

1 Answer

How to ingage the for wheel drive


Yes the light should be on when it is in 4 wheel drive, either 4h or 4l, to engage it into 4h you need to lock the hubs then select 4h while moving. Now if u want to put it into 4L you need to first stop the truck, put it into neutral and then select 4L

Sep 29, 2012 | Cars & Trucks

1 Answer

HOW TO SHIFT TO 4 WHEEL DRIVE


Hi - Here is instruction how to do.

From N to 4H

Stop the vehicle completely, place the

transmission in "N" (Neutral) and depress

the brake pedal and the clutch pedal fully

(if equipped), then push in and turn the

switch to shift into "4H".

From 4H to 4H LOCK

You can operate the transfer switch either

when the vehicle is stopped or while the

vehicle is moving.

Position the front wheels straight ahead

and turn the switch to shift into "4H LOCK".

If the vehicle is moving, we recommend

that the speed be less than 100 km/h (60

mph) during this operation.

NOTE:

• When shifting between the transfer

switch position and the transfer gear

position is unmatched, all 4WD indicators

will blink and the buzzer will sound.

• If it is difficult to shift between "4H" and

"4H LOCK" while the vehicle is moving,

try accelerating and decelerating your

vehicle several times after turning the

transfer switch. Be sure to wait until traffic

conditions allow you to accelerate and

decelerate safety before using this procedure.

From 4H LOCK to 4L LOCK

Stop the vehicle completely, place the

transmission in "N" (Neutral) and depress

the brake pedal and the clutch pedal fully

(if equipped), then push in and turn the

switch to shift into "4L LOCK".

From 4L LOCK to 4H LOCK

Stop the vehicle completely, place the

transmission in "N" (Neutral) and depress

the brake pedal and the clutch pedal fully

(if equipped), then push in and turn the

switch to shift into "4H LOCK".

From 4H LOCK to 4H

You can operate the transfer switch either

when the vehicle is stopped or while the

vehicle is moving.

Position the front wheels straight ahead

and turn the switch to shift into "4H". If the

vehicle is moving, we recommend that the

speed be less than 100 km/h (60 mph) during

this operation.

NOTE:

• When shifting between the transfer

switch position and the transfer gear

position is unmatched, all 4WD indicators

will blink and the buzzer will sound.

• If it is difficult to shift between "4H" and

"4H LOCK" while the vehicle is moving,

try accelerating and decelerating your

vehicle several times after turning the

transfer switch. Be sure to wait until traffic

conditions allow you to accelerate and

decelerate safety before using this procedure.

From 4H to N

64J209

Stop the vehicle completely, place the

transmission in "N" (Neutral) and depress

the brake pedal and the clutch pedal fully

(if equipped), then push in and turn the

switch to the mark (1) at the left of the "N"
position, and hold the switch in this posi-

tion for 5 seconds until the "N" indicator

blinks, then turn the switch to the "N" position.

When you turn the transfer switch to the

"N" position, "N" indicator will come on with

the buzzer sound.

CAUTION

• Be sure to stop the vehicle completely

before operating the transfer

switch to shift between "N" and

"4H", or between "4H LOCK" and

"4L LOCK".

• Do not shift between "4H" and "4H

LOCK" unless the front wheels are

in the straight-ahead position and

we recommend that the vehicle

speed be less than 100 km/h (60

mph).

Do not operate the transfer switch

while tires are racing.

• Do not operate your vehicle in "4H

LOCK" or "4L LOCK" on dry, hard

surfaces.

(Continued)

CAUTION

(Continued)

• Do not operate the vehicle while a

4WD mode indicator is blinking

except when shifting between "4H"

and "4L LOCK".

If you operate the vehicle while a

4WD mode indicator is blinking, a

buzzer will sound and the transfer

will shift to "N" (Neutral) to prevent

transfer case damage.

In this case, use the following procedure.

1) Depress the clutch pedal fully (if

equipped) or shift the automatic

transmission gearshift lever to the

"N" position.

2) Turn the transfer switch to the

position previously selected.
3) Operate the transfer switch again.

Feb 01, 2011 | 2007 Suzuki Grand Vitara 4WD

1 Answer

4L light flashes in 05 rodeo 4x4 3.0 deisel


water is getting inside the switch boot on the transmission
when it dries , light goes out

Jun 03, 2009 | 2004 Isuzu Rodeo

1 Answer

92 Isuzu Trooper front axel won't engage in 4H or 4L!


Sounds like your auto hubs need to be looked at.

Mar 10, 2009 | 1992 Isuzu Trooper

2 Answers

99 nissan pathfinder 4 wheel drive once put into 4 wheel drive popping noise underneath the vehicle


that sounds like a bad universal joint on the transfer case to the front axle. have that checked out

Oct 01, 2008 | 1999 Nissan Pathfinder

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

224 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...