Question about 2001 Ford Escape

1 Answer

I need to replace the Headlight Lens on a 2001 Ford Escape

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You need to replace the whole headlight unit, which requires removing the plastic bumper.

Posted on Oct 14, 2009

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 6 Answers

SOURCE: headlight went out in 2003 ford escape i have

you have to remove the whole headlight assembly, then pop off the front cover pull the old bulb out and put the new one in. reverse the process to re-install. there is a small plastic tab on the topfront of the headlight assembly, that is what you need to release to get the clear cover off and get inside.

Posted on Oct 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My lights for a ford escape 2001 wont work


check under the hood for black box,lift the cover off of black box,marked" main fuse and relay boxfuse positions should be marked on underside of the lid to main fuse panel box,that you have just removed.check for a blown headlamp fuse in that box. it's either a blown fuse in that box,or if only one headlights "out" it will be a blown bulb(headlight bulb) it's very unusual for both headlight bulbs to blow at once. so in saying that,look for a blown headlight fuse. thank you for choosing fixya.com.

Apr 09, 2011 | 2001 Ford Escape

1 Answer

Water getting into the head lights


You may need to put some silicone sealer around where the glass lens seals to the headlight housing.

May 29, 2010 | 2001 Ford Escape

1 Answer

How do I seal out water from the headlight on a 2005 escape


You cant, just replace both theadlights. they are yellowed and hazed over anyhow. you wont believe how good new headlights will be for you.

May 13, 2010 | 2001 Ford Escape

1 Answer

I have a 2001 Ford Escape , when you turn the headlights on only the Brights work . The Bright light indicated light on the dash stays on all the time . Its like the dimmer switch is stuck on high . Dave


Headlight Switch....or some call dimmer switch...you must remove steering wheel to complete job....part is around $110 at Autozone or Advance

Apr 17, 2010 | 2001 Ford Escape

1 Answer

2001 ford escape has dim headlight. Tried 2 new bulbs no help as well as new headlight assembly since old one was dull and yellowed. Thanks


First, make sure your battery terminals are clean and tight. Also check that the ground strap from the battery is tight. Also check that the ground lead in the headlight wire harness is also clean and tight. You should also check the charging system to see that it is working properly. Output with no load is usually between 13 and 14 volts, (about 13.4 -13.6). Then check with load and it should still be above 12 volts if working properly.

Mar 25, 2010 | 2001 Ford Escape

1 Answer

Headlight went out in 2003 ford escape i have


you have to remove the whole headlight assembly, then pop off the front cover pull the old bulb out and put the new one in. reverse the process to re-install. there is a small plastic tab on the topfront of the headlight assembly, that is what you need to release to get the clear cover off and get inside.

Sep 02, 2009 | 2003 Ford Escape

2 Answers

Replace headlight bulb for 2005 ford escape


Here's a video that will show you how to replace the headlight bulbs in your Ford Escape.

Jun 08, 2009 | 2005 Ford Escape

1 Answer

2005 Ford Escape Headlight Condensation


most of the time the headlight assemblys are replaced because of this at my work (toyota dealeraship ) but i would try to take apart the headlight assembly very carefully by prying up the tabs and glue that attach the front to the bach then clean out and reseal, or you could try to use a clothes hanger with a small amount of cloth or paper towel taped to the end and insert through the hole where the headlight bulb goes may take some time but could save you a considerable amount of money hope this helps

Apr 30, 2009 | 2005 Ford Escape

1 Answer

Trying to pull the tail light lens off a 2001 ford escape


Bulbs should be accessible from the inside without removing the lens

Mar 26, 2009 | 2001 Ford Escape

Not finding what you are looking for?
2001 Ford Escape Logo

Related Topics:

292 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...