Question about 2006 Honda Odyssey
How to replace air filter and cabin filter for 2007 Odyssey
Hw to change air filte rin 2007 Honda Odyssey
The problem with other web instructions is little guidance on how exactly to remove the glove box. First, the little cover over the control am needs to be pulled off (down towards you). Either fingers or a screwdriver.
Next, trickiest part is removing the retaining tabs. See instructions here: http://techinfo.honda.com/rjanisis/pubs/AI/AII38194.pdf
Basicaly, there is no way to ge behind the glove box to compress the release tabs. So insert a scredrver into the plastic tab cover from the insider of the glove box and just pull towards you until it pops out. When reinserting just place back (with the retainer cylinders poking back through the opening from inside the glove box) and press back in until it snaps.
On the 07 Ody, once you ave the control arm released and the two retaining tabs removed, the glove box should fold down completely. Then just press towards each other the two black end tabls holding the ac filter compartment door. Took me 30 min to figure out, hopefully with this should take you 5 ...
Posted on Jul 09, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I have a factory manual for 1999-2004 but I believe the filter is in the same location on a 2005. First, you have to remove the glove box. It's a straight forward process with a phillips head screwdriver and a 10mm socket. The filter is in the middle of the black plastic air handler behind the glove box. It is in a vertical slot covered by a narrow "door" with clips on top and bottom. If it has never been changed before, you will have to cut out the horizontal plastic cross brace that kept the dash assembly from warping during manufacture. Cut with a hack saw at each end of the plastic brace and remove it. You'll notice a metal cross brace that can be removed with screws at each end. Once the braces are removed, it is easy to unclip the filter door and replace the filter. Then just put everything back except the plastic cross brace you removed; it can be thrown out.
Posted on Jul 15, 2009
Tips for a great answer:
Mar 13, 2011 | 2007 Audi A6 Avant Wagon
Mar 01, 2011 | 2007 Honda Odyssey
Feb 26, 2010 | Honda Odyssey Cars & Trucks
Nov 05, 2009 | 1996 Honda Odyssey
Jul 13, 2009 | 2005 Honda Odyssey
Jul 09, 2009 | 2007 Honda Odyssey
Apr 03, 2009 | 2005 Honda Odyssey
Mar 24, 2009 | 2005 Honda Odyssey
3,307 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: