Question about 1997 Jeep Grand Cherokee

1 Answer

1997 jeep larado does nothing when i turn key

Posted by on

  • sgp1976 May 11, 2010

    have you checked battery voltage do any dash lights come on?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 27 Answers

As a first step you might want to clean the ignition key switch. To do that disconect the negative batery cable. Using a long and thin star screw driver loosen 4 screws located underneeth the plastic piece holding the ignition key swithc. No need to un plug any connector yet. As you ge the plastic piece loose, separate it from its place. This will expose the little cleaning hole of the switch. Using contact cleaner spray, spary the wholes while turning the key clock wise and counter clock wise several times. Let the cleaner evaporate for a while. Connect the negative battery cable back. Try starting now.

Posted on Aug 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a 2000 Jeep Grand Cherokee Larado with a blown head gasket. The problem is we have lost the key and no garage will fix the head without a key and the dealership can't program a new key withou


First I would check with a different dealership. you will be required to provide only the VIN and probably some verification that you own the car, but the dealership can make a key and program it without the car even being there. I hope this helps.

Oct 05, 2012 | 2000 Jeep Grand Cherokee

1 Answer

How much transmission fluid goes in my 1997 Jeep Grand Cherokee Larado V6 and where do I fill it?


Hi there:
Check this information about your 1997 Jeep Grand Cherokee 4WD 4.0L MFI 6cyl...

- 42RE transmissionService change only - 4 quarts. Total refill - 11 quarts.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Jun 21, 2012 | 1997 Jeep Grand Cherokee

2 Answers

What size bolt is it for the idler pulley for 1997 jeep grand cherokee larado?


Should only be one bolt going thru the center of the pulley. probably a 14 or 15mm size.


Dec 20, 2010 | 1997 Jeep Grand Cherokee

1 Answer

My 1997 Jeep Larado had the distributor brake at the braket that holds it in place. The jeep stopped running of course. I went and got a new distributor and brought the number 1 cylender to TDC and put the...


If the distrubutor is definatley installed correctly, as you have some one crank the engine turn the distributor sightly counert clock-wise and clock-wise until the engine fires up. Then set the timing with a light. Double check the wires are in the correct position on the dist in relation to spark plug/cylinder places.

Jun 05, 2010 | 1997 Jeep Grand Cherokee

1 Answer

My 1997 jeep cherokee larado has a hard time starting


First check the security system by locking and unlocking the passenger door with the keys. Then make sure you are getting spark to the plugs.

Jan 18, 2010 | 2002 Jeep Grand Cherokee

2 Answers

1995 Jeep Larado-alarm wont turn off


hi have u tried taking wires off battery then eathing then for a minute and putting back on

Jul 29, 2009 | 1995 Jeep Grand Cherokee

1 Answer

1997 jeep g c l looking for the blower motor control modual


check under the dash on passenger side under the glove box and see if your vehicle is listed here www.autozone.com and if it is they have diagrams and pictures

May 07, 2009 | 1997 Jeep Grand Cherokee

1 Answer

Where is the blower motor resistor located in the 1997 jeep grand cherokee larado?


IT IS UNDER THE GLOVE BOX NEXT TO THE BLOWER MOTOR.IT WILL HAVE 2 DIFFERENT ELECTRICAL CONNECTOR

May 07, 2009 | 1997 Jeep Grand Cherokee

Not finding what you are looking for?
1997 Jeep Grand Cherokee Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...