Question about 1992 Honda Accord

1 Answer

My car is runnning only on 3 spark plugs and there is no compression in the fourth one

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 6,826 Answers

Lock for a stuck valve or valve spring broke etc,in that 4th cylinder

Posted on Jul 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 toyota sienna get misfire on No 3 spark plug.error code is P0303.


check for fuel and compression on cylinder 3. any oil on old spark plug?

Feb 27, 2017 | 1998 Toyota Sienna

1 Answer

The starter rotates but the engine doesn`t start?


Check 3 basic things:
1 Do you have spark on the plugs
2 Do you have fuel coming to the carburetor or injector
3 Do you have compression.

The easiest way to check for spark is to use an old spark plug, take a wire from one of the plugs on the engine, put it on the old plug, place the plug on a metal part of the engine or body and crank the engine. There should be a healthy blue spark over the points. If you don't have an old plug, take one out of the engine and do the procedure.
Check for fuel by removing the delivery pipe and place it in a container (empty food can, bottle etc. then turn on the ignition for a very short while, fuel should pour out of the delivery pipe. If the car does not have an electric pump, crank the engine for just two or three turns.
Check for compression by removing a spark plug, have someone crank the engine while you try to close the plug hole with a finger. The compression should press your finger out of the hole, or get a compression gauge.

Mar 18, 2015 | 1988 Opel Kadett

1 Answer

Car won"t start


An engine needs 3 essential things to operate;Spark,fuel,and compression.Determine if you are getting spark from your spark plugs,determine if you are getting fuel by smelling the spark plug center electrode for a fuel odor.compression can be tested by doing a leak down test in tune with each of the cylinders.good luck!

Nov 30, 2013 | 1997 Oldsmobile Regency

1 Answer

CAR STARTS THEN DIES RIGHT OFF HAVE FUEL AND SPARK COMPRESSION IS ABOUT 105


Sound like the fuel pumps not doing it job if the fuel pressure drops off quick. Might also be the regulator but most likely the fuel pump is not pumping enough. They only time the fuel pressure should drop off it when you bring the rpm up and it shouldn't drop off that much maybe 5 psi at most any thing below that i would change the fuel pump.

Dec 20, 2011 | 1998 Toyota Camry

1 Answer

I have a 1995 vatara and i wound run on cylender 1. i have spark fule and compreshon to that cylender. when the engin i s rinning it runns ruff if u tale the spark plug lead out it has no change . it has...


WELL THAT YEAR YOU HAD THROTTLE BODY FUEL INJECTION AND MULTIPORT FUEL INJECTION. IF YOU HAVE MULTIPORT FUEL INJECTION. YOU COULD HAVE DEAD FUEL INJECTOR OR LOW COMPRESSION AND INTAKE LEAK TO CYLINDER 1. CHECK COMPRESSION THAT WILL TELL YOU WHAT HAPPING.YOU COULD HAVE A SLIGHT HEAD GASKET LEAK.

Aug 17, 2010 | 1995 Suzuki Sidekick

2 Answers

Have a misfire on cylinder 3


Hello
Here is what to check let me know if you need help checking this out
most common misfire causes on the cars I've worked on have been:
  1. Spark plugs
  2. Spark plug wires
  3. Ignition coil
  4. Fuel injector
  5. Wiring to fuel injector
  6. Timing Belt
  7. Vacuum leak or stuck open EGR
  8. Contaminated fuel or bad fuel pump
  9. Weak compression
  10. Blown head gasket

Jul 14, 2010 | 1998 Dodge Durango

1 Answer

2007 Volvo XC90 fault codes-ECM P030000, P030100, P030300, P0304000, what do they mean?


first code means random/multiple misfire cylinder (s) detected
second code means misfire detected number 1 cylinder, third code, miss=fire number 3 cylinder fourth code misfire number 4 cylinder
causes can be spark plugs, HT leads, ignition coils, injector, wiring fault, low compression/ engine mechanical fault

Jun 04, 2010 | 2007 Volvo XC90 V8 AWD Sport

1 Answer

Car very heard to start in the am but when it dose start it runns fine


when has the car had a tune up? Check the spark plugs and the spark plug wires, change the pcv valve and clean the throttle body plates and the mass air flow sensor.

Oct 12, 2009 | 1999 Saturn SL

1 Answer

Kia mentor 1.8 ist and 3rd cylinder not working changed the plugs leads and injectors the compression is good but the prblum is still there


check to see if the coil on cylinder 3 is sending out a spark to do this use a tester. they can be purchased at an auto parts store. they look like a spark plug but the end is open to see if the spark will jump under compression. a normal plug will jump with no compression but sometimes will not jump under compression

Jul 30, 2009 | Kia Amanti Cars & Trucks

Not finding what you are looking for?
1992 Honda Accord Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...