Question about 1998 Dodge Caravan
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: 1998 dodge grand caravan. belt
Hi there cmaries65,
We're gonna get you fixed right up. You will be my eyes and hands. I will explain what we will be doing and why. Sound good?
I do need to know what type of belt it is. Is it a single long belt winding around all the pulleys (called a 'serpentine belt') or several shorter ones? If it's a serpentine, the routing pattern should be on a sticker under your hood.
Both are easily put back on, but the procedures are quite different. Both require a socket/ratchet set.
What concerns me though is why did it come off in the first place?
Meaning: will it come off again when you start the engine?
Have a look at the belt. Has it come apart, ripped? Any fraying or excessive wear?
Has the vehicle given you any other problems recently? Made any strange sounds or smells?
Comment me back.
Posted on Oct 01, 2008
it is located in the gas tank.It is called fuel pump module which includes fuel pump,sending unit for gauge and strainer.It can also be replaced separately.You have to lower gas tank to access.
Posted on Jan 17, 2009
Remove the Caravan Ignition Coil Step1 Look under the hood for a distributor. The spark plug wires connect into the distributor cap. If you don't see a distributor, you may have a model with a distributorless ignition system. Step2 Find the ignition coil. On a Dodge Caravan, the ignition coil is at the back of the intake manifold. Disconnect the negative battery cable to prevent injury while you work. Step3 Determine whether you need to remove the windshield wiper/motor module assembly. This won't be necessary on all models. Step4 Disengage the connector securing the wiring harness connector to the Dodge Caravan ignition coil. Then, disconnect the ignition wire from the ignition coil. Step5 Use a socket set to remove the mounting bolts. There are upper and lower mounting bolts. Separate the ignition coil from the mounting bracket. Install the New Ignition Coil Step1 Insert the new ignition coil. Mount the Dodge Caravan ignition coil to the mounting bracket. Step2 Attach the mounted assembly to the intake manifold. With a Torque wrench, tighten the fasteners securing the ignition coil to the mounting bracket with 96 inch pounds of torque (10 Nm). Step3 Tighten the bolts that secure the intake manifold to the bracket with 115 inch pounds of torque (13 Nm). Step4 Connect the wire harness and any other parts you removed, including the negative battery cable.
Posted on Feb 23, 2009
SOURCE: 1998 dodge Neon no fire to coil
it sound like you have a bad crank sensor when the sensor gets hot it open circuits inside the sensor and you loose spark if you have access to a noid light see if you are loosing injector pulse also if so then you know its a good chance its the crank sensor
Posted on May 29, 2009
Tips for a great answer:
Mar 07, 2014 | 2005 Dodge Caravan SXT
Jan 26, 2014 | 2000 Dodge Caravan
Aug 05, 2012 | 2003 Dodge Caravan
Nov 06, 2011 | 2000 Dodge Grand Caravan
Jan 13, 2010 | 1998 Dodge Caravan
Nov 07, 2009 | 1999 Dodge Grand Caravan
Jul 02, 2009 | 2004 Dodge Ram 1500
Jun 13, 2009 | 1998 Dodge Caravan
Feb 23, 2009 | 1998 Dodge Grand Caravan
49 people viewed this question
Usually answered in minutes!