Question about 1994 Chevrolet C1500

1 Answer

I have a 1994 c1500 2 wd. the transmission will

I have a 1994 c1500 2 wd. the transmission will go into all forward gears, but not reverse. is this a common problem or rebuild time?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 366 Answers

Yes its common,rebuild time!

Posted on Jul 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Transmission problem?


When is last time you changed trans fluid and filter?

Jul 23, 2016 | 2005 Chevrolet Silverado 1500

1 Answer

What causes Jimmy transmission to slip in forward gears, but OK in reverse


If your fluid level is right you may have a bad transmission. you need to talk to a mechanic.

Mar 22, 2014 | 1994 GMC Jimmy

1 Answer

Reverse on 1994 Isuzu Trooper


run fault codes and look for a reverse solenoid /sensor fault.

Apr 25, 2013 | Cars & Trucks

1 Answer

Was pushing snow and heard aloud ping while in reverse and it quit pulling.all forward gears still work. sounded like a u-joint. believe me i no that sound.i drive it like i stoled it. lol.but thats what...


not sure if this is an automatic or manual transmission 1st (automatic)if all forward gears are still working what it sounds like is that the reverse drum in the transmission has come apart. which will eventually cause the forward gears to start to go if thats the case, the rapir for the reverse drum is internal the transmission will need to be rebuilt. you can just put a reverse drum, but my opinion is there will be more damage and while its out might as well rebuild the entire transmission. you didnt mention if it was 4 wd or not and only rarely have i seen a transfer case cause the same issue, once most recently in a f150 with a manual transmission i was working on the chain stretched so bad it lost reverse but had all forward gears. 2nd (manual) could have lost the reverse synchronizer whic again the trans will need to be repaired either with just a syncro or complete rebuild. hope this helps

Feb 04, 2011 | 1999 Chevrolet 3500

1 Answer

Our 1994 thunderbird only runs in reverse . Is that a transmission problem?


The Trans. pump works better in reverse than in forward gears so I would say that the Fluid is low or the pump needs work.

Dec 19, 2009 | 1994 Ford Thunderbird

1 Answer

Reverse won't work on my 1994 GMC Surburban 4x4. Only 90K miles, truck is in great shape otherwise. All other gears work fine. Tranny fluid looks and smell fine, it was changed in the last 12K miles.


If you have no reverse, more than likely, you have either a stripped or broken sunshell, assuming you have the 4L60E transmission. Are you absolutely sure you have all forward gears? Another indication of the sunshell being defective, will be no engine braking in manual second.

Nov 19, 2009 | 1994 GMC Suburban

1 Answer

"I have a 1994 S10 Blazer, 4 WD, 4.3.


Have you topped up your transmission fluid yet?

Aug 09, 2009 | 1994 Chevrolet S-10 Blazer

1 Answer

1994 Ford Ranger won't shift into drive


In 9 out of 10 cases when I see this problem in the ranger, it is the planetary gear in the transmission. It is made of the cheapest metal available. It breaks usually from going to park before the truck stops or switching from reverse to drive while still rolling. Just a Idea , But I hope it isn't that . Reverse will work fine for a while, and have no forward gears.

Jan 15, 2009 | 1994 Ford Ranger Supercab

Not finding what you are looking for?
1994 Chevrolet C1500 Logo

Related Topics:

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...