There are diagrams on google. It should be on the passenger side of the intake near the distributor.
What fan exactly are you referring to. If it is the ac fan under the dash or the electric radiator before the engine . We will need this information to be able to help you.
Dnt think there is 1 m8 its controlled by engin when it gets to curtain heat it turns on
SOURCE: location or diagram of pump relay switch
The Constant Control Relay Module (CCRM) is in the right hand front of engine compartment, mounted to upper radiator support.
SOURCE: 1997 mercury villager, engine removal?
I have'nt done one myself but a friend tells me it is way easier to come out the bottom of the van.Just undo struts at the top ,remove brake lines undo motor mounts and remove framework bolt and take it out as a unit.Getting it up through to mo looks impossible.
SOURCE: Alternator Removal
Alternator - REMOVAL & INSTALLATION
Fig. Alternator wire identification
Hope help with this (remember rated this post).
SOURCE: 1997 Mercury mystique the engine cooling fan will not operate
it could be the engine coolant sensors on the thermostat housing it controls the fans when they work if your sensor is out you can unplug the sensor while running the motor and if they turn on after a moment(the fans)then the sensor is bad if not make sure your fans work by jumping power to them 12volt
353 views
Usually answered in minutes!
×