Question about 2005 GMC Envoy Xl

1 Answer

2005 GMC envoy XL won't start It seems like its not getting gas. I turned the key on and pushed the gas pedal to the floor and nothing it won't start its not the fuel pump its fine

Posted by on

  • kevin butler May 11, 2010

    i guess it is turning over but not catching......first ? is when you turn the key to the run position does the check engine light light up....if yes then the main computer is powering up....next have you tried to pull the codes... if so post them.. also while turning over the motor do you have spark to plugs.....post new info

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • GMC Master
  • 1,311 Answers

First, do not push the gas pedal at all when starting. There are many things that can cause a no start. A scan tool needs to be hooked up to see if there are any fault codes detected. This problem needs to be diagnosed by a trained mechanic.

Posted on Sep 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2005 GMC Envoy XL. Will not engage starter. Like something electrical. Turn key and nothing. Worked fine until now.


Could be the neutral safety switch if it won't crank in neutral or park, could also be the starter has failed.

Feb 22, 2015 | 2005 GMC Envoy Xl

1 Answer

03' Envoy turned over at first then not at all


Are you saying it won't crank now, or just won't start ?
There should be a solenoid that locks the shifter that is activated by the brake pedal switch. I would check for voltage at the brake switch and that solenoid.
You are right in the thought about the code. It is for the throttle actuator control module and could have been set by pumping the gas pedal with the key on.

Jul 23, 2012 | GMC Envoy Cars & Trucks

1 Answer

How do you reset the change oil on message center


Turn the key to the run position with the engine off. Push the gas pedal to the floor 3 times within 5 seconds. Light should start flashing. Then it should reset.

Feb 14, 2011 | 2003 GMC Yukon XL

1 Answer

How to reset service lamp after oil change on a 2000 yukon gmc


I have a 2005 GMC Envoy and you turn the key to on, then press the gas pedal to the floor three time in 5 sec. The oil light blinks once and your done. I'd give it a try. Remember engine off but the key is on. Can't hurt to try it. Otherwise you'll need an owners manual to figure it out.

Feb 12, 2011 | 2000 GMC Yukon XL

2 Answers

How to reset change oil light in 2002 gmc envoy


On a 2002 Envoy you turn the key to run but don't start it. Then push and release the gas pedal 3 times within 5 seconds. The change engine oil light should blink for 5 seconds meaning you have reset the system. If it doesn't blink for you do the procedure again.


Feb 08, 2011 | GMC Envoy Cars & Trucks

1 Answer

How do you reset oilchange light on a 2001 yukon xl


turn key to on position, pump gas pedal to floor 5 times and turn off key. start vehilce. Change oil light should flash for 7 seconds and then go out.

May 15, 2010 | 2001 GMC Yukon XL

2 Answers

With motor running, brake pedal goes to floor and swoosh of air is heard


Could be brake booster leaking. When engine is off the brake pedal should be firm and not go to the floor. If the pedal goes to the floor engine off, there may be a master cylinder problem also.

Oct 28, 2009 | 2005 GMC Envoy Xl

2 Answers

I need to learn how to reset the change oil light since the mechanics forget to do this when I get my oil changed.


On a Envoy you turn the key to run but don't start it. Then push and release the gas pedal 3 times within 5 seconds. The change engine oil light should blink for 5 seconds meaning you have reset the system. If it doesn't blink for you do the procedure again.

Oct 18, 2009 | 2003 GMC Envoy Xl

1 Answer

2005 GMC envoy XL won't start


Envoy/Trailblazer/Ranier/Ascender vehicles do have a fuel filter. Mine Envoy XL, 6 cyl.) is on driver's side, inside chassis under passenger door.

Jun 30, 2009 | 2005 GMC Envoy Xl

1 Answer

2000 yukon xl


turn the key to the run position engine off, push the gas pedal all the way to the floor then release it 3 times within 5 seconds, the DIC will say oil life reset.

Nov 05, 2008 | 2000 GMC Yukon XL

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

256 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...