I need a Ford 150 front end suspension diagram for a 1990 truck and the names of the parts.

Go on Google images for the diagram the parts should all be in the illustration , make your list from there. I Hope things work out

Try the parts dept of the nearest Ford dealership. They often have
'exploded' views of many of the autos parts - perhaps they may
copy the page for you. These views are usually numerically labeled,
so get the page that gives part names that correspond to the labels,
also. If they are hesitant to do this for you, remind them that you may
be buying the parts from them, once you identify the problem...
Also, most auto parts stores have service manuals for common auto
makes... usually $25-$30. (no, I don't get a penny :-) )
Good luck!

Go to (autozone.com) and sign up for free access to parts pictures, prices etc, as well as repair manuals with step-by -step and pictures to help you.

Best bet go to library see if they have manual there then look under front end

Hello! First diagram is the lower...Second is the upper..Guru...saailer

LOWER IDENTIFICATION:




Item
Part Number Description 1
5495 Stabilizer Bar Link Bolt and Bushing Assembly 2
18A192 Nut, Washer and Bushing Assembly 3
808264 Bolt 4
5005 Frame 5
5B326 Torsion Bar (LH) 6
5B327 Torsion Bar (RH) 7
620481 Nut 8
5C491 Nut and Washer 9
3079 Front Suspension Lower Arm (LH) 10
3078 Front Suspension Lower Arm (RH) 11
3A130 Tie Rod End 12
808166 Nut 13
808167 Nut 14
5K483 Front Stabilizer Bar Link 15
5482 Front Stabilizer Bar 16
5484 Front Stabilizer Bar Bushing 17
3B353 Front Stabilizer Retainer 18
N807396-S100 Bolt A
- Tighten to 40-55 Nm
(30-40 Lb-Ft) B
- Tighten to 150-200 Nm (111-148 Lb-Ft) C
- Tighten to 21-29 Nm
(15-21 Lb-Ft)


UPPER IDENTIFICATION:
Item Part Number Description 1 3C156 Damper Assembly (RH) 2 805348 Nut and Washer 3 - Shock Absorber Insulator
(Part of 18198) 4 3C157 Damper Assembly (LH) 5 3020 Front Suspension Bumper 6 3083 Front Suspension Upper Arm Assembly A - Tighten to 34-47 Nm
(25-35 Lb-Ft)



LOWER DIAGRAM FOLLOWED BY UPPER:



I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867

Below is the diagram to install your serpentine belt.

1990 F-150 5.0L

Yes ur RiGHT about it!

Everytime u replace some parts in the suspension and steering linkages in any car, YOU SHOULD PROCEED TO ur nearest WHEEL ALIGNMENT services!


Hope that aligns everything!

i need to grease mt ball joiints for my 1997 ford taurus

Suspension The independent front suspension (IFS) system is composed of a two-piece front driving axle, two front coil springs (5310) and two radius arms. The front driving axle consists of two independent axle arms. One end of each axle arm is anchored to the frame (5005). The other end of each axle arm is supported by the front coil springs and radius arm.

Front Suspension

too many details to explain here.find a HAYNES REPAIR MANUAL or equivelent covering your vehicle.step by step instructions w/ pictures.