Question about 1998 Subaru Legacy

1 Answer

Hello, recently my 1998 subaru legacy limited GT 2.5l has not been shifting correctly, it is an automatic transmission. when i drive it it revs real high in 1st gear and then skips 2nd and goes to 3rd gear. in the manual it says i need to adjust the band on the transmission which is just a locknut and a bolt. i can not seem to find this band adjustment anywhere. any help eould greatly be appreciated thanks.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

First off before adjusting anything change your tranny fluid and filter that usualy helps the tranny

Posted on Jun 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is my Subaru legacy gt 1998 automatic transmission slipping and vibrating when going into gear ?


Your transmission slips ---your done,there is
only one fix,remove it & have it rebuilt or
a reman installed

Oct 21, 2012 | Subaru Cars & Trucks

2 Answers

I have a automatic 2003 Subaru legacy L 108,000 miles, I had new belts and a water pump replaced last year, I just had the spark plugs changed. When I try to accelerate, it is very slow and the car revs...


My guess would be either the transmission fluid and filter needs to be srviced or the transmission is having a issue with the shift linkage.. Does it improve when the car warms up ?

May 30, 2012 | 2003 Subaru Legacy

1 Answer

My 1994 Subaru Legacy Touring (Turbo) Wagon is not shifting properly when taking off. It does not shift until 3500 rpm at 20 mph. The initial shift should be around 2000 rpm. All other gears seem...


Hi,
The 1st>>2nd shift on the Subaru 4EAT automatic transmission can be more abrupt, but 3500 is too high.
Is there any delay when shifting from Park to Drive?
Does the Power light flash on startup? If it does, you can pull the codes by following these instructions.

This trans has 'bands' that can be adjusted. I'm not 100% sure they affect the 1st>2nd gear shift, but maybe they need adjusted.

Take a look @ ultimatesubaru.org/forum and http://bbs.legacycentral.org. 2 sites dedicated to Subarus.

Good luck,
Td


Feb 18, 2010 | 1994 Subaru Legacy Outdoor

1 Answer

93 Subaru Legacy Automatic transmission wont go into reverse


need to get trans looked at no simple fix without looking to diagnose problem,dont drive it till its seen to as it could be serious

Jul 29, 2009 | 1993 Subaru Legacy

2 Answers

1998 subaru band adjustment for auto transmission.


It is on the left side hard to spot. Look below the heater hoses. Good luck, take your time and have a great day.

Jun 26, 2009 | 1998 Subaru Legacy

1 Answer

Subaru legacy 4eat issue...


Check that the Duty Solenoid B is good. Diagnostic may indicate a code 12. Easy to replace. Solenoid is on valve body next to filter. Must drop pan and should be right there. Call Subaru dealer with your VIN number and they can verify. Price is about $150 to purchase over dealer parts counter.

May 29, 2009 | 1998 Subaru Legacy

2 Answers

2000 Subaru Outback transmission problem


After a good deal of research and several shops suggesting a rebuild of the transmission, I decided to have the trans fluid and filters changed before doing anything. It was a tough call because it could have been a waste of $125. As soon as the spin off filter was removed you could see it was blocked. So the hydraulic pressure in the system was way down, still enough to engage reverse and enough to work all the shifts, but not enough to engage forward without a slight tap on the accelerator.

My Subaru has 240 000 km on it and I suppose the clutch pack rebuild wouldn't hurt, but as it is now it engages quickly and shifts up are noticeably smoother.

May not be the solution for every case, but it solved my situation.

Mar 18, 2009 | 2000 Subaru Outback

1 Answer

Automatic Transmission 1997 Legacy


This transmission requires overhaul, it is likely the only solution, second hand units are almost impossible to find.

Nov 20, 2008 | 1997 Subaru Legacy

Not finding what you are looking for?
1998 Subaru Legacy Logo

525 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...