Can I look up a car using the vin number? - 1998 Volvo S70

You can get using the entire VIN number only.
Enter the VIN (top right corner) in the link Shopping for Used Car

The 10th character in the 17-character VIN represents the vehicle model-year.

1. This standard applies to vehicles built in or after 1981. ...
2. Note: VINs do not include the letters I (i), O (o), Q (q), U (u) or Z (z), or the number 0, so that they will not be confused with similar looking numbers/letters.

The vin number is an international system used to identify vehicles. It is like a bar code but in numbers instead of black bars . If you contact the car's maker at the customer relations department and recite the vin number to them they will be able to tell you what components were used in the build of the car from a bill of material used to order all the parts for the car

The Vin # is on your insurance card,registration card,
& title

The vin # does not get higher as the year goes up, the vin # each number has a meaning to it, for example body code is one number then year then engine type and so on, it does not start at 1 and go up as the years do, hope this explains it good day

Can test in THIS LINK: Enter a VIN Number to begin HERE.

Official GM car and truck VIN decoder cards: http://service.gm.com/dealerworld/vincards/

Get complete VIN info on your GM car or truck that looks like this:



Hope helps.

A used body control can be used in a vehicle other than the vehicle it was installed in. the body control module when first installed is programmed with the vehicle vin number. the vin number can not be changed was it was written to the BCM. the oprions can be always change in the BCM but not the VIN number. basically the used bcm you have installed has the vin number from the vehicle was installed in, now the vin number in the used BCM doesnt match all the other control modules

the vin number on the receipt maybe the vin number the used engine came from which is required by law. It shows the engine came from a car not stolen
Its the law to print the vin number on customers receipts for any used parts installed in their cars

The 3.5L (VIN H) engine's unique ignition system has the ignition coils directly over each plug. No spark plug wires are used.




3.5L (VIN H) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System



The firing order for the 3.1L VIN M, 3.4L VIN E, 3.4L VIN X and 3.5L VIN H engines is 1-2-3-4-5-6. The right bank cylinders are on the cowl side (rear) of the engine compartment and are numbered 1,3,5, left bank cylinders on the front side of the vehicle, are numbered 2,4,6.




3.1L (VIN M) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System





3.4L (VIN X) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System





3.4L (VIN E) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System




The firing order for the 3.8L VIN K and 3.8L VIN 1 engines is 1-6-5-4-3-2. Starting at the front of the engine, cylinders in the left bank are numbered 1,3,5 and cylinders in the right bank are numbered 2,4,6.






3.8L (VIN 1) engine Firing order: 1-6-5-4-3-2 Distributorless Ignition System









3.8L (VIN K) engine Firing order: 1-6-5-4-3-2 Distributorless Ignition System


I hope help you with this, remember rated this help. Good luck.