Question about 1995 Jeep Grand Cherokee

2 Answers

No display on service center display

I have no display at all on the display above the center console, I really am not sure what it does? it has two buttons select and set I believe, I'd have go look to be sure, anyway It's a 95 jeep grand cherokee laradeo, is there a fuse ?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Have simular prob., in a 96 G.C. The display went ALL ON then blu the fuse taking out the radio & AC control. Removed display unit, now fuse doesn't blo, radio & AC now work. Now to repair or replace display.

Posted on Aug 07, 2010

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

If it is working it will tell you if any doors, hatches are open, it tells you when your next service is due, If you are in 4WD or not. On the all time 4wd it tells you if you are in "Lo" . Mostly shows date and time. Check your grounds and power source fuses. It may need replaced. Also if something is wrong it makes a really annoying sound and it desplays a message. " Servire 4WD Switch" for exaple. I hope that helps . I just bought mine and just trying to fix it up for hunting. good luck Alex

Posted on Jun 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How to change the heater core in a 02 explorer


the complete lower section of the dashboard must be stripped down
including the glovebox , center of dash front and the center console
i would remove the front seats to give more space to work

Aug 27, 2016 | 2002 Ford Explorer

Tip

Ford service light procedure 1994-01


Windstar

1999-01

To reset CHANGE OIL SOON/OIL CHANGE REQUIRED message on the message center, press the SETUP control to access the System Check mode. Press and release the RESET button until IF NEW OIL HOLD RESET is displayed. Press and hold RESET button until OIL LIFE SET TO 100% is displayed.


Windstar


1997-98

To reset "CHANGE OIL SOON/OIL CHANGE REQUIRED" message on the Message Center, press "RESET" and "SETUP" controls at the same time. "OIL LIFE % HOLD RESET NEW" will be displayed. Press the "SETUP" control to access the System Check mode. Press "RESET" to start the system check. Press and hold the "RESET" control. Press "RESET" and "SETUP" to reset the system to 100%


Explorer,
Mercury
Mountaineer


1997-01

To reset the oil life feature on the Message Center, press and hold the "OIL CHANGE RESET" button until the system counts down (about 5 seconds). The Message Center will display "OIL LIFE RESET TO 100%"


Probe

with Analog Dash

1989-92

When "SERVICE" is illuminated on the Vehicle Maintenance Monitor on the overhead console, press the "SERVICE INTERVAL RESET" button located directly above the light.


Probe

with Digital Dash

1989-92

When "SERVICE" is illuminated on the Vehicle Maintenance Monitor on the overhead console, press the "SERVICE INTERVAL RESET" button located directly above the light.


Probe

with Digital Dash

1989-92

When "SERVICE INTERVAL CHECK" is displayed is displayed on the far left side of the instrument panel, press the "SERV OFF" button, located on the speed alarm keyboard, until three tones sound.


Thunderbird,
Mercury Cougar

with System Scanner

1986-88

When "SERVICE" appears on the Diagnostic System Scanner, press the "ODO SEL" and "TRIP RESET" buttons simultaneously. The "SERVICE" message will go out and three short beeps will be heard when the system is reset.


Thunderbird,
Mercury Cougar


1989-94

If "CHANGE OIL SOON" or "NOW" is indicated on the Monitor, turn the ignition on, but do not start the engine. Within 16 seconds, insert a paper clip into the cavity to the left of the display and depress. The display will flash; when it stops, the system is reset.















on Dec 07, 2009 | Ford Windstar Cars & Trucks

1 Answer

Half my dashboard is not working


Center console or drivers. It\'s most like driver and you simply have a burned out light. However replacing it is a pain in most cars. You usually can not just reach behind like with tail lights but have to remove the whole lower panel. It least it not a Prizm. To change it bulbs you have to remove the glove box console, then the drivers side console just to remove the center console. I gave up and used heavy duty Velcro to hold a cigarette lighter powered LED light above the radio to light up the center console. You might try something similar for you dashboard. Also, just make sure they are not turned down since their brightness is adjustable.

Sep 28, 2014 | 2003 Toyota Avalon

1 Answer

How to remove center console from 2008 dodge caliber


Hi Rich, hope you well today here's is the fix you need.


23 - Body/Interior/CONSOLE, Center/Removal REMOVAL [img id=LOPTableImg src="https://w05.dealerconnect.chrysler.com/service/mds2002/common/images/collapse.gif"> Click to display a list of Labor Operations associated with this procedure
248438.jpg 1. Pull back on parking brake (5) to the upright position. 2. Open console door and remove two screws (1) fastening console to rear floor bracket (3). 3. Carefully pry up until the retainers (1) disengage from the center console to front floor bracket (6). 4. Disconnect center console wire connector (2) to instrument panel connector. 5. Remove from vehicle.

Hope this help and have an awesome day Rich.

May 23, 2014 | 2008 Dodge Caliber

1 Answer

Tc light is on what is that


Hello: TC Means traction control. It would be best to check for symptom codes with a upscale scanner to find out what is causing the code. Make sure there isn't a switch to turn the TC system off. Check above the center console on the center dash panel for the switch, may have TC on it.

Jan 20, 2011 | 1998 Cadillac Catera

1 Answer

1991 ford t-bird


your shift cable has snapped and needs to be replaced there is not really any reliable quick fix but you can shift by pushing or pulling on the snapped portion of the cable

May 19, 2009 | 1991 Ford Thunderbird

1 Answer

An alert saying something about service 4-wheel


According to the mechanic who works on others 94 Jeep it's one of threethings:
1) Corrosion on the connector to the switch (which is locatedon top of the transfer case).
2) A bad switch. Part cost about $22.00or,
3) A bad console display. he says they have had a fair number of console display units fail

Check the information about VIC (Vehicle Information Center)in here: ZJ-Secc-8E-Instrument-Cluster-and-Gauges (Section 8E Page 11 and next)

Maybe is an reminder about service or maintenace time.

Good luck... and remember rated my help!!!

May 09, 2009 | 1995 Jeep Grand Cherokee

3 Answers

Center Console Display Not Working


Changed the battery yesturday in my Mazda rx-8. Now my radio/CD and my A/C won't work! It's all black! Wot to do???

Jan 28, 2009 | 2004 Mazda RX-8

Not finding what you are looking for?
1995 Jeep Grand Cherokee Logo

282 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...