Question about 2002 Buick LeSabre
I have a 2002 buick century trying to locate the radiator cooling fan temperature sensor.Where might it be located?
I am Welsea Zhang in China
In China, we always meet a problem from Buick car,the problem of fan sensor wire always burned while run 4-50000km, does America meet the same problem?
Waiting for your kind reply
my email is firstname.lastname@example.org
Many thanks and best regards
Posted on May 23, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
check out with your dealer as you might have a recall to fix this problem.
Overheating - Cooling Fans Inoperative - Replace Module Prior To Retailing - Service Action S932
This Service Action Applies to Vehicles That Have Not Been Retailed
The cooling fan module on X-TYPE vehicles may fail under certain circumstances. There are various root causes but the design and quality of the printed circuit board within the cooling fan module are the most significant. The NAND gate used in the circuit is detective causing multiple failure modes, this can result in high engine temperature and overheating due to the cooling fans not operating.
A change has been implemented in production from VIN C91720. On these vehicles a 'Philips' printed circuit board has been used that has a modified voltage spike protection strategy.
To prevent customers from experiencing this issue, install the latest specification cooling fan module on 2002-03 MY X-TYPE vehicles within the above VIN range that have not been retailed.
1. Install new cooling fan module (see Workshop Manual, JTIS CD ROM, section: 303-03, SRO 26.25.38).
Warranty claims should be submitted quoting S932 in place of the warranty fault code together with SRO: 26.25.38 and the relevant part number. This will result in a labor time allowance of 0.8 hours to replace the cooling fan module and payment for the part used. Should the vehicle be brought back into the workshop for this action alone to be undertaken, an additional labor time allowance of 0.1 hours can be claimed quoting SRO: 10.10.10 for drive in/drive out.
Warranty claims should be submitted quoting the information found in the table. This will result in payment of the stated time and, where applicable, parts/miscellaneous expense codes.
The options that allow for drive in/drive out may only be claimed when the vehicle has been brought in to the workshop for this action alone to be undertaken.
The SROs and parts items listed above have been included for information only, there will be no requirement to enter the parts or SROs onto the claim.
NOTE: Always perform a DDW claim search first to determine whether this service action has been performed on this vehicle. The warranty selection under the vehicle inquiry will give a listing of all claims against the vehicle. If this service action number appears in the program code field, do not perform this service action.
Posted on Jan 19, 2009
Ros.....The heater motor is located under the dash on the right hand side (passanger side). You will have to remove the close out panel to access. The resistor you are looking for will be to the lower left of the fan motor at about the 7:00 position. Illustration is below.
let me know.
Posted on Feb 10, 2009
Tips for a great answer:
Nov 18, 2012 | 1995 Buick Century
Sep 29, 2012 | 1996 Buick Century
Jul 23, 2012 | 2002 Buick Century
Jun 13, 2012 | 2007 Buick Century
Aug 16, 2011 | 1994 Buick Century
Jul 02, 2011 | 2002 Buick Century
Feb 27, 2010 | 2002 Buick Century
Apr 29, 2009 | 1999 Buick Century
960 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: