Question about 1994 Buick LeSabre

1 Answer

I had to put a new water pump in my 94 buick le sebre and now i cant remember how to put the belt back on...

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 157 Answers

Check under the hood, there should be a decal there. If not find a friend or relative who has a (what you probably have) 3.8litre with the same accessories you have, or check out a junk yard. A cellphone camera, or a digital cam can do wonders too. Try a safe gas station and ask to see someone's engine, (really kidding- but it might work, you never know). Actually, the decal should be there, check and see.

Posted on Jul 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The easiest way to take off a water pump for 2004 Chrysler Sebring


Take it to a garage and say "put a new water pump in this for me".

2004 Chrysler Sebring 2.7Ltr. Water Pump Replacement ...

z? 29:29 https://www.youtube.com/watch?v=ebeXcNmBnnE Sep 19, 2015 - Uploaded by Paul Veltum In this video I'll walk you through replacing the water pump on this 2004 Chrysler Sebring with it's 2.7 ...

2004 Chrysler Sebring Timing Belt Water Pump Before 90K ...

2q==? 13:03 https://www.youtube.com/watch?v=UQHRa28sRkY Nov 25, 2012 - Uploaded by Mastermind Denver This video shows why we at Mastermind Enterprises Auto Repair Shop in Denver recommend replacing the ...

WATER PUMP REPLACEMENT IN CHRYSLER 2.7L ...

9k=? 4:52 https://www.youtube.com/watch?v=z_QrXR2jcb8 Mar 7, 2014 - Uploaded by kzguy2 2008 Dodge Charger 2.7l was in need of a new water pump due to it leaking. ... 2004 Chrysler Sebring 2 ...

2004 chrysler sebring water pump weep hole inspection ...

2q==? 0:15 https://www.youtube.com/watch?v=wzqHaQ40doQ Feb 26, 2014 - Uploaded by Graeme Tolton 2004 chrysler sebring water pump weep hole inspection with borescope. ... 2004 Chrysler Sebring 2.7Ltr ...

Chrysler 2.7L Water Pump Installation Problems - YouTube

9k=? 3:30 https://www.youtube.com/watch?v=h5_VFJ1gCpI Nov 19, 2014 - Uploaded by South Main Auto Repair When I installed this water pump on the 2006 Chrysler Sebring 2.7L I ran into a ... 2004 Chrysler Sebring 2 ...




Feb 15, 2016 | Chrysler Cars & Trucks

1 Answer

How to change a water pump on 99 buick regal 3.8 L


You need to release the tension on the serpentine belt first. Special tools are available to do this. Take out the bolts that hold the pulley on the pump.Once this is done then you can start removing the bolts that hold the water pump on. They are small diameter bolts so not much pressure is needed to turn them. Watch the length of each bolt removed and note which hole it came from. If the pump doesn't fall off after the last bolt is removed, tap it with a rubber mallet. Now scrape the old gasket from the engine. Be careful not to gouge the metal and do not leave any material behind on the engine. When installing the new gasket put a couple of bolts on the new pump to use as a guide when putting the new pump back on the engine. Tighten all the bolts, put the pulley back on the pump and put the serpentine belt back.

Oct 20, 2014 | 1999 Buick Regal

1 Answer

I cant remember where the belt tensioners go on my 1997 riviera supercharged engine


Your parts dealer should be able to print a diagram for you. Also, check with the Buick Riviera owners websites.

Apr 09, 2014 | 1997 Buick Riviera

1 Answer

1998 Buick Le Sabre - Water pump needs to be replaced, Serpentine Belt constantly slips off and its overheating


The dealer cost is about 475 and a shop cost is 385 and do it yourself is 106,since your getting other work done means it sounds fair,3 hours to do water pump.Here's a link on doing the water pump. Repair Guides Engine Mechanical Water Pump AutoZone com here's the water pump. Water Pump 1998 Buick Lesabre 6 Cylinders 3 8L SFI OHV AutoZone com plus a gallon of extended life antifreeze full strength.And a tube of sealant and gasket.

Feb 01, 2014 | Buick Cars & Trucks

1 Answer

How do you change the water pump on a 1998 buick skylark?


Hi This is d_hubbs: Removal and replacement of your water pump.I'm assuming you have a 2.5 Engine.You did'nt give your engine Information but about 75% of your Year and Model had the 2.5 in them.
1st start by disconnecting your negative cable on your Battery. Then Drain your Coolant into a Container: then remove your drive belts remove your fan from the water pump: You probally should also remove your alternator and A/C Compressor to make it easier to get to your water pump, now remove your lower Radiator Hose, then remove your water pump mounting bolts, now remove the water pump: Now Clean the water pump surface on your engine where your gasket will be. Besure its Clean Good : NOTE: Sometimes if you purchase a New water pump it will not have the drive belt pulley on it. if this is the case Remove your Pulley from your old Pump and install it on your New pump : now Run some gasket sealer on your new water pump where the gasket will go.put gasket on the new pump lining up your mounting bolt holes.also put a small bead of sealer on the engine where your water pump will mount: now Mount your New water pump to the engine with the Mounting Bolts.Torque the Mounting bolts at 25-30 Foot Lbs.
Inspect your Drive belts and Hoses its a good time to put new ones on if needed.Now put your lower Hose back on-re-install your A/C compressor and Alternator-Put your fan back on-now put All your Drive belts back on be sure to Adjust the Belt Tension and Lock down the Bolts.-Fill your Radiator back up with coolant,If the Fluid you took out is still fairly new ,you can use it. If its Aged best off putting new Coolant. Replace the Battey Cable Start your Car and Check for any Leaks , After your Thermastat opens you'll need to recheck your Coolant Level. if no Leaks and Cooling System is Full you Are Done. Please let me know how my advice and Solutions have Helped you. Thanks for Using FIXYA From d_hubbs

Jun 09, 2010 | 1998 Buick Skylark

2 Answers

Belt water pump


drain cooling system, lossen but dont remove bolts on waterpump pully ,then remove belt by prying back tensioner, (make a drawing of belt route so you can reinstall when done.) next remove bolts holding pump on, now pump should pull off.clean old gasket off block, now put gasket on pump with a little coat of sealant between pump and gasket, now install new pump, reverse direction to put back together, hope this helps, good luck.

Dec 23, 2009 | 1995 Buick LeSabre

1 Answer

Changed water pump cant remember how belt goes


call or e-mail a car repair man and ask them to come to your house.It might cost a little money but your problem will be fixed.

Jun 15, 2009 | 2002 Ford Taurus

1 Answer

2000 buick lesabre - water pump replacement


first disconnect the battery then check how the serpentine belt is lined up so u can take it off and put back on. Then the pump should be on the side of the motor with 9or12 bolts there could be more! after taking out take razorblad and skrap the old gasket clean wipe of then put new gasket and pump back on dont over tighten the screws cuase the pump my be aluminum.

Mar 17, 2009 | 2000 Buick LeSabre

1 Answer

Need to replace water pump in a 1989 buick regal


the water pump is going to be one of the pulleys on the serpintine belt. its going to be the only one that uses the back of the belt(side with no groves) to spin it. take the belt off and undo the three screws on the pulley and pull it out. then put the new pump back in. make sure belt is one right. make sure cooling system is still full. and you should be good to go.

Mar 17, 2009 | 1989 Buick Regal

1 Answer

1997 buick le sabre


its the electrical connection at he fuel pump,if this is ok ask if they replaced the strainer on your fuel pump,your fuel pump is inside your gas tank ,you have to drop the tank to service,most fuel pumps are not warrantied if you dont change the strainer,when your car shuts off the sediment on the strainer falls back into the tank,but when you run your car and it sucks up the gas thru the strainer to the pump it clogs the strainer and the fuel pump cant pump,you shoiuld find out if they changed this because your forcing your fuel pump to work harder,was it a new fuel tank or used one that they put in

Jul 09, 2008 | 1997 Buick LeSabre

Not finding what you are looking for?
1994 Buick LeSabre Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...