Question about 2003 Saturn VUE

1 Answer

How do i change the drive belt on a 2003 saturn vue v-6 L81

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 543 Answers

Well its fairlly involved, you must remove the air intake and air box bottom, remove the engine mount,and place a jack under the oil pan with a piece of wood inbetween,otherwise youll crack the very thin oil pan and it will leak,, the remove the bracket on the side of the engine that the mount attached to and then using a 15mm socket pull on the tensioner and the belt will come off,then reassemble

Posted on Oct 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Torque specs for 2003 saturn veu 3.0


2003 Vue Torque Specs? - SaturnFans.com Forums

www.saturnfans.com > ... > Models > Saturn Vue > Vue Tech

Feb 4, 2009 - 6 posts - ‎5 authors
Does anyone have/know where I can get the torque specs for a Saturn Vue? ... See attached for 2003 2.2 and 3.0 engine torque and front ... need vue torque specs
9 posts
Oct 13, 2010
Filter cap and drain plug torque spec
14 posts
Feb 19, 2009
Lug Nut Torque?
5 posts
Oct 6, 2008
S-Series Torque Specifications
15 posts
Nov 13, 2004
More results from www.saturnfans.com

Nov 26, 2015 | Saturn Cars & Trucks

1 Answer

How do I change serpertine drive belt on 2003 Saturn vue


support the right side of the motor. remove the right side engine mount (5-7 bolts) using a socket wrench or serpentine belt wrench take tention off the tensioner while keeping tension off the tensioner remove the belt. NOTE: take notice of how the belt is routed.

to install reverse remove steps

Sep 10, 2010 | 2003 Saturn VUE

1 Answer

When is timing belt supposed to be changed?


2006 Saturn Vue with a 3.5L engine V-6, Saturn recommends replacing timing belt every 100,000 miles, also replace water pump, due to it is timing belt driven, this is an interference engine which piston to valve damage will occur in the event of timing belt failure.Hope this was very helpful.

Aug 26, 2010 | 2006 Saturn Vue

1 Answer

Where is the coolant temp. sensor located on a 2003 saturn vue 6 cyl.


the coolant temp sensor is located at rear of engine oppisit the timing belt under rear of intake manifold.

Jan 11, 2010 | 2003 Saturn VUE

2 Answers

What is the recommendation for mileage to change


needs to be replaced every 100,000 Miles

Nov 14, 2009 | 2004 Saturn VUE

1 Answer

How do I repair a problem with the code p0742?


Hey marcarhernan

This code is set when there is a variance in speed from the transmission input and output shafts. It can be a simple sensor issue or a more complex internal problem. There are several recalls for VUE transmissions but I do not think yours falls under this problem. Yours sounds more like an internal belt issue which Saturn has a technical bulletin for as shown below. This usually requires replacement of the case cover and filter and sometimes the belt depending on the damage. This is the bulletin that has to do with your code;

Bulletin No.: 04-07-30-024E
Date: June 09, 2006
TECHNICAL
Subject:
No Movement in Drive or Reverse with or without DTC P0741, P0742, P0841, P1756, P1758, or P1882 (Replace Case Cover Assembly and Filter) Models:
2002 Saturn VUE - Retrofitted with a 2003 or 2004 VT25E (VTi) transaxle (RPO M16/M75)
2003-2004 Saturn ION
2003-2005 Saturn VUE
with VT25E (VTi) transaxle (RPO M16/M75)
Supercede:
This bulletin is being revised to add additional Correction information. Please discard Corporate Bulletin Number 04-07-30-024D (Section 07 - Transmission/Transaxle).
Condition
Some customers may comment on the vehicle not moving in the "D" (Drive) or "R" (Reverse) gear selection positions. In many cases, the transaxle will also produce an audible grind or whine noise when attempting to operate in drive or reverse. The Service Engine Soon (SES) telltale may be illuminated with DTCs P0741, P0742, P0841, P1756, P1758, or P1882 set.
Cause
This condition may occur when the VT25E transaxle belt has malfunctioned.

May 14, 2009 | 2002 Saturn VUE

2 Answers

Need to locate and change alternator in 2003 saturn vue


how to replace alternator on 2003 saturn vue 3.0 v6

Mar 24, 2009 | 2003 Saturn VUE

Not finding what you are looking for?
2003 Saturn VUE Logo

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...