1999 Ford Econoline Logo

Related Topics:

A
Anonymous Posted on Jul 21, 2014

Does vacuum affect ford econoline transmission

1 Related Answer

Benjamin Walton

  • 27 Answers
  • Posted on Jul 10, 2009

SOURCE: ford econoline 350 87 i need to change

the only difficult part is catching all the fluid, i would recommend doing the filter while your at it it is extremly easy, if you can change your oil you can do a filter and a gasket,
one recomendation though put the bolts through the holes in the pan and through and the gasket before you put the pan on the gasket will hold the bolts in place and you wont have to try and line up the rubber gasket to the holes lying upside down under your van

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

What type of transmission fluid should I use for ford econoline 350 year2005

98-06 Econoline with 4R70W transmission MERCON-V
98-06 Econoline with 5R110W transmission MERCON-SP
0helpful
1answer
2helpful
1answer

My b/f's 2000 ford econoline e150 is having

Have you checked the transmission fluid? just make sure that when you check it, the engine is running
1helpful
1answer

I have an 86 Ford Econoline Van and the Cruise control doesnt work any suggestions?

Hi ,
More than likely you have a vacuum problem either a vacuum hose is off or cracked or the vacuum servo for the cruise control is bad also check the fuses. Have a good day.
0helpful
1answer

It shifts from 1st to 2nd OK But will not shift from 2nd 3rd until way late and then acts as if it is slipping in 3rd. Seems work almost ok when it is cold 94 Ford E 150 conversion van

CHECK TRANSMISSION FLUID LEVEL.IF ALL IS GOOD YOUR 2 - 3 SHIFT VALVE IS STICKING OR BINDING.GOVERNOR VALVE STICKING.YOU COULD HAVE STICKING OR BINDING ACCUMULATOR VALVE 3 - 2 CONTROL VALVE TV LIMIT VALVE 1 - 2 OR 2 - 3 SHIFT VALVE TRAIN.CHECK THE VACUUM VALVE IF EQUIPPED.USE HAND HELD VACUUM PUMP.PUMP VALVE TO 15 HGS. IF IT HOLD VACUUM OKAY IF DONT HOLD VACUUM VACUUM VALVE NEED REPLACING.
0helpful
1answer

Where is the vacuum modulator located on a 1994 Ford 5.0 econoline van

This particular van should not have a vacuum modulator. That part is located on the transmission and controls shifting which is electronically controlled on the 94 models.
2helpful
1answer

My 1994 ford econoline van is not shifting gears

Hello.
This a repair for a transmission shop. Sounds like the pumps are bad inside the transmission. Thats the worst option I have.
It also can be a poor shift linkage adjustment. And the last solution can be the speed module that tell the transmission when to shift.
Goodluck! I hope this helps!
1helpful
1answer

I have a 1982 ford van that will not shift gears when i am driving, can you tell me some reasons why this would happen? And Is there anywhere i can get a free 1982 ford econoline transmission diagram...

look down on the side and see if a vacuum hose goes into a little round diaphram.. If you find it unplug it and look to see if it got fluid in it. If it does replace the modulator. If dry make sure the linkage on the carb is hooked up correctly. This is about all you can do without replacing an internal part.
10helpful
1answer

Where is the speed sensor on a 1995 Ford econoline van

the sensor is located on the driver side of the transmission case
0helpful
1answer

C6 substituted for E4OD transmission

dont think so the eod4 controlls. all your comp eng needs timming. fuel -ect
Not finding what you are looking for?

135 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...