Question about 1999 Lincoln Continental
You must remove the cargo carpet lining from inside the trunk in the corner behind the taillight. Five nuts removed the sealed light assembly. Once removed, the bulbs are behind quarter turn sockets.
Posted on Aug 05, 2009
Tail light bulb needs replacing
Posted on Jul 23, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
open the trunck and pull the carpet down behind the tail light there you will find nuts or wing nuts holding the light in. remove theese nuts and pull the light off then you can replace the bulbs
Posted on Feb 09, 2010
Tips for a great answer:
May 02, 2015 | Cars & Trucks
Jan 30, 2015 | 2011 Ford Escape
Aug 27, 2012 | 1998 Buick LeSabre
Feb 06, 2012 | 1998 Mitsubishi Lancer
Mar 04, 2011 | 2000 Lincoln Town Car
process for replacing tail light bulbs is the same in all models. If
you have a burnt-out tail light bulb, you may need to replace the
brake light, the reverse light or the turn signal. The procedure to
replace each of the bulbs is the same.
1. Open the Hummer's rear swing gate. This will expose the edge of the vehicle's tail light assembly. You'll see two small Phillips head screws that hold the tail light assembly in place. Put on your gloves.
Remove the two screws from the tail light assembly. Pull the tail
light out and inspect the back for two bulbs. The top bulb is the
brake light and turn signal. The bottom bulb is the reverse bulb.
Determine which bulb you need to replace.
the tail light into its cradle. Hold it with one hand and replace
the Phillips head screws with the other.
Dec 03, 2010 | 2008 Hummer H3
Sep 23, 2010 | 1988 Nissan Pathfinder
Jun 08, 2009 | 2005 Chevrolet Impala
Apr 06, 2009 | 1996 Buick Century
210 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: