Question about 2003 Ford F350 Super Duty DRW SuperCab

3 Answers

Running lights dont work, fuse is good - 2003 Ford F350 Super Duty DRW SuperCab

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 2,760 Answers

Yep I agree the switchs are very problematic on these

Posted on Jul 08, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Ford Master
  • 2,050 Answers

The fuse is before your light switch. All four corners dont work? All bulbs are good?

Posted on Jun 29, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 66 Answers

Replace headlight switch this is very common problem

Posted on Jun 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Tail lights on trailer not working f250


did you check the trailer /tow fuse under hood in truck? located lfet side rear near firewall top. should be fuse for towing / trailer.DW Mylin

Dec 01, 2012 | 2008 Ford F 250 Super Duty 4WD

1 Answer

Fuse #47 blowes on my 2000 focus all bulbs are good


it only means that your elecrical system on your running light was grounded thats why everytime you switch on the running light the fuse blown. The only solution to that is to find out where the line was shorted or grounded. you must start tracing it from your switch going down the elecrical line going to the fuse, relay and lights.
That's it, good luck then.!!!

Oct 01, 2012 | 2000 Ford Focus

1 Answer

My tail running lights dont work and i checked the fuses how do i fix it


you say you checked the fuse so I ASSUME its good? and getting power? there is a Tail Light Relay. If the relay is good, then that fuse (tail light) will have power. If it does not, then check the relay, maybe rap on it. The relay is round up under the dash, left kick panel area. just below where the tail light fuse is.

Dec 17, 2010 | 1987 Toyota 4Runner

1 Answer

Brake lights dont work all others good and fuses


brake lights don't work **** my fuses are good.

May 12, 2010 | Cars & Trucks

1 Answer

Running lights brake and dash/interior lights dont work, head lights blinkers reverse lights work checked fuses all were good. is there some other fuse besides the ones in the dash? or is there something...


I was going to say the dash and running lights run off a singular fuse, replace it just in case, also check under the hood, there is another control board under there. possibly a relay might be at fault, worst case, the light switch is faulty. Good luck

Nov 20, 2009 | 1994 Chevrolet S-10

2 Answers

Some insisde dash lights dont work


Review this information about Instrument Cluster Service Procedures: ZJ-Secc-8E-Instrument-Cluster-and-Gauges (Page 8E-5 and next).

Good luck, and remember rated this help.

Aug 13, 2009 | 1994 Jeep Grand Cherokee

3 Answers

Dash lights and tail lights not working on my 1999 chevy malibu


Hi its rob here what make and model of car is it? it sounds like the light switch is faulty but that wouldnt stop the brake lights workin try two stop and tail light bulbs then if you have stop lights your switch is at fault

May 11, 2009 | 1999 Chevrolet Malibu

1 Answer

Hazard lights dont work &turn signals lights dont work.


Sounds like a blown fuse. check manual for the location of fuse box. There should be a diagram , what runs what. Just replace the right one. good luck DFD

Apr 22, 2009 | 2001 Dodge Stratus

1 Answer

My 1996 cutlas ceirra v6 runs, but no lights work


sounds like a body fuse or lighter fuse. Check fuses with a test light

Mar 29, 2009 | 1996 Oldsmobile Cutlass Ciera

1 Answer

No front, or rear running lights, or dash lights


check tailight and instr light fuse with a test light rather than visably

Mar 26, 2009 | Chevrolet Suburban 1500 Cars & Trucks

Not finding what you are looking for?
2003 Ford F350 Super Duty DRW SuperCab Logo

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...