Question about 2004 GMC Yukon

2 Answers

Delali ABS and Stabilitrak

We have a 2004 Denali with 75,000 miles on it. The ABS and Service Stabilitrak warning came on. What can cause this? Is it something I can fix myself or is it a dealer thing?

Posted by on

  • Ron Jun 29, 2009

    Your answer is the same as the owners manual. It doesn't tell you anything. Turn it off and try again. Obviously if the warning comes on it means something is wrong. I wanted to know possible causes or if it is one of those things, I should just roll over and get out the check book. I know basically how the system works and that the stability trak is intertwined with the ABS.

  • Ron Jun 30, 2009

    Thank you. I wanted to know the simple things that can cause this that I can check out. I know if it is something major it will go to the garage, because I do not really have that kind of time right now.

    Thank you very much,

    Ron Henderson

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • GMC Master
  • 426 Answers

There are several things which can cause this. I can give it to you in technical terms if you it will help but some of the basic thing so look for before going any further are low brake fluid level, blown fuses for the abs system as they are marked in power distribution box under hood turn your front wheels from side to side and see if the wheel speed sensor wires were somehow broken and also rear wheels.Check the basics first before spending the money but if these things seem to be ok, yes you will have to take it to a dealship to have it diagnosed.Anyone with a TECH2 scan tool it doesnt have to be a GMC dealership. There are alot of small repair shops you can check out and see if they have the proper equipment. It may save you some money in the long run. If they can afford a tech 2 chances are they have experience and know how.I hope for the best with your problem.

Posted on Jun 30, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 296 Answers

Hi
Stabilitrak service light will come on if a problem is detected in the StabiliTrak system.
Stabilitrak indicator warnin light should come on briefly when the engine is started. If the warning light does not come on then, have it fixed so it will be ready to warn you if there is a problem. If it stays on, or comes on when you are driving, there may be a problem with your StabiliTrak system and your vehicle may need service.
When this warning light is on, the system is off and will not limit wheel spin. Adjust your driving accordingly. This light will also flash when the StabiliTrak system is active.

If the ABS light stays on, turn the ignition off, if the light comes on when you are driving, stop as soon as it is safely possible and turn the ignition off. Then start the engine again to reset the system.

chek this site to ve indepth knowledge regardin ur problem,u need to open/save the folder after clickin the below site
www.4wpmerch.com/service/TB06-11-Chev-07StabiliTrak.doc .

hope u will b helpfull
regards

Posted on Jun 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changed bearings and abs light and stabletrack still on do they reset after u replace the bearings and if so how long


Service Traction Control - Stabilitrak and ABS light, Help - Page ...

chevroletforum.com > ... > Tahoe & Suburban
Aug 16, 2012 - Service Traction Control - Service Stabilitrak and ABS light came on. ... Its supposed to still be under warranty, "Major Guard". ... I replaced my rear shocks with OEM re-manufactured Arnott shocks (great company) and in the ...

SilveradoSierra.com • Traction Control, Stabilitrak & ABS Issue

www.silveradosierra.com/.../traction-control-stabilitrak-abs-issue-t18976...
Jan 28, 2014 - Traction Control, Stabilitrak & ABS Issue. Tue Jan 28 ... The wife and I got in to head out and see my brother and as soon as I turned the key the ServiceTraction Control, Service Stabilitrak messages flashed and the ABS light came on. ... check your wheel bearings my was gone and caused the same thing ...

Chevrolet Impala Questions - Hello. I have a 2012 Chevy ...

www.cargurus.com > Questions > Chevrolet > Impala

CarGurusApr 6, 2013 - Occasionally when I hit the brakes I get a Stabilitrak Error Message " ... I believe GM still had 3 year/ 36,000 mile bumper to bumper ... After about 2 months of intermittent noises the ABS light came on, the service stabilitrak warning, servicetraction ... Edit....left hub bearing change after the right one changed.

Replaced front hub - now ABS/Stabilitrak lights on... - Chevy ...


Dec 12, 2015 | Cars & Trucks

1 Answer

I had a problem with power steering leak . They changed the hoses and pump and reservoir and rack. Now I have stabilitytrac control light on and when you are stopped you can't turn the steering wheel.


Service Stabilitrak, Traction Control lights ON, alone with check ...

chevroletforum.com > ... > Equinox
Jul 9, 2012 - I have a 08 Equinox with 79000 miles on it, for the last few weeks or soI've been having the service traction control/ service stabilitrak light ... HELP - Service Stabilitrak & Service Traction Control - Chevrolet ...
Aug 30, 2011
Service Traction Control - Stabilitrak and ABS light, Help ...
Feb 12, 2011
More results from chevroletforum.com

How To COMPLETELY Disable Traction/Stabilitrack Control ...

? 6:16
https://www.youtube.com/watch?v=TUoV2ue7amY
Jul 7, 2013 - Uploaded by Kyle Riegle
How to completely disable traction control on gm/chevy trucks and suv's. ... I got to anaheim the light of the ...

Has anyone ever had the service stabilitrak, service traction ...



Dec 05, 2015 | Cars & Trucks

1 Answer

I keep getting a message service stabilitrak


StabiliTrak Indicator Light: If the warning light does not come on then, have it fixed so it will be ready to warn you if there is a problem. If it stays on, or comes on when you are driving, there may be a problem with your StabiliTrak system and your vehicle may need service. When this warning light is on, the system is off and will not limit wheel spin. Adjust your driving accordingly.

This light will also flash when the StabiliTrak system is active. If the StabiliTrak system warning light comes on and stays on for an extended period of time when the system is turned on, your vehicle needs service.

The traction control part of StabiliTrak can be turned off by pressing and releasing the StabiliTrak button if both systems (traction control and StabiliTrak) were previously on. To disable both traction control and StabiliTrak, press and hold the button for five seconds.

Traction control and StabiliTrak can be turned on by pressing and releasing the StabiliTrak button if not automatically shut off for any other reason.

When the TCS or StabiliTrak system is turned off, the StabiliTrak light and the appropriate TCS off or StabiliTrak off message will be displayed on the DIC to warn the driver. Your vehicle will still have brake-traction control when traction control is off, but will not be able to use the engine speed management system.

If the StabiliTrak and/or Traction Control are not operating properly, I encourage you to take your vehicle in for inspection. A certified technician will be able to offer a more accurate diagnosis.

Apr 29, 2015 | Cars & Trucks

1 Answer

Cadillac Escalade EXT 2007 steering was giving noise so we changed the bearing and fixed it but now I can see Stabilitrak warning light is on. I guess there's a steering sensor installed. Is it related to...


There is a steering sensor located at the base of the steering column. If the stabilitrak light is on, there should be a service engine or ABS light on. Have the codes checked and write them down as not to forget. Typically the code is set in the ABS system if the steering sensor is having an issue. However engine and transimission issues can cause the stabilitrak light to come on.

Good luck.

Nov 29, 2014 | Cars & Trucks

1 Answer

Service stabilitrak warning comes on


possible that you have :
brakes issues
sensor issues
electrical connection issues...

the light comes on due to a fault code. that needs to be retrieved and then you can diagnose from there.

Dec 30, 2013 | 2006 Saab 9-7X

1 Answer

Slipped on some ice tonight and had to rock car. Pushed stabilitrak burron first as recommended. Car came out fine, Service stabilitrack message came on, also, ABS light, and brake light. Drove home about...


You may have pulled a wire lose under the rear of the car which would make the lights come on. It has rear abs so I would jack it up and look for broken wire or disconnected wire. Hope this helps leave a comment.

Feb 12, 2011 | Chevrolet Equinox Cars & Trucks

Not finding what you are looking for?
2004 GMC Yukon Logo

Related Topics:

616 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...