Question about 2004 Dodge Ram 2500
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
very easy take the mirror inside cap off if you can not get to the 3 bolts then you will have to take trim panel off to take trim panel off look for plastic caps take them out and unscrew them then pop out the bottom of the door and pop the sides out then lift up and out should be loose enough for the bolts now/ 10mm bolts 3 Please rate my response thank you very much
Posted on Feb 02, 2009
Watched my dad do it this afternoon. There is an exposed screw on the left side of the door panel and one at the bottom of the panel. There are also two hidden screws, one behind the door handle and one inside the little hole in the armrest (pop off the plastic plugs). There are also three recessed screws behind the speaker cover. You can pop the speaker cover off with a flathead screwdriver. I'm pretty sure thats all of them. You can pop the panel off then, but watch the wires connecting stuff inside. The hardest part is getting it over the door lock. .
Once the panel is loose you have to pop off the black plastic cover hiding the back of the mirror. There are three recessed bolts holding the mirror. My dad had to get a special wrench to get those off and he dropped one inside the door, so be careful (we fastened a magnet to a coat hanger and got it back). Mine had some remote gizmos, so he had to had to unplug the little square thing and then popped off what was left of the old mirror. If your new mirror has a wire with a little box, feed it through the hole and plug it in. Once you have it positioned correctly, you can screw on the bolts and put eveything back together. It helps to have another person there while you are trying to position the mirror correctly. Hope I didn't miss anything. Good luck!
Posted on Apr 23, 2009
To replace the driver side mirror glass only, Grasp the side view glass only and pull off carefully. It is attached with clips and should come off pretty easy. Install new glass, lining up the clips and carefully push in. It is recommended you use a towel cloth over the glass for cushion and safety.
Posted on Jul 23, 2009
The passenger side manual door mirror fell out and I want to put it back in myself but I am wondering how it clips back in?
Posted on Aug 18, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
Posted on Sep 29, 2009
Tips for a great answer:
Mar 09, 2013 | 2005 Chevrolet Silverado
Jan 11, 2013 | Cars & Trucks
Jan 09, 2010 | 2008 GMC Sierra 2500HD 2WD
Nov 30, 2009 | 2004 Dodge Ram 2500
Aug 10, 2009 | 2004 Dodge Ram 2500
Jul 23, 2009 | 2004 Dodge Ram 2500
Jun 12, 2009 | 1998 Dodge Ram
Nov 28, 2008 | 2004 Chrysler Sebring
56 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: