Question about 1998 Dodge Caravan

2 Answers

1998 Dodge caravan. air in abs.

Bled the brakes front and back, Started the van, no brakes, they are going to the floor. How do you blled the air out of the abs system?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 216 Answers

You cant bleed the ABS,this is your anti lock brake system,try to bleed them again,then check your power brake booster,check for loose vacuum hoses.

Posted on Jun 29, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 138 Answers

Why did you bleed the brakes to begin with? Were they getting soft? Start over and bleed master cylinder first, making sure you get lots of fluid and air coming out. Then do wheel cylinders.

Posted on Jun 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brakes on a Lincoln mark viii coupe 1995 fitted new M/cylinder L/front and R/rear wont bleed is somthing wrong in the abs and how much for a new unit


All four brakes must be bled to eliminate the trapped air...probably not anything else...try lubricating the bleeder fitting with PB Blaster before trying to open...be cautious as this valve can break off, and that means rebuild the caliper drill out broken fitting...or replace caliper...either way all 4 brakes must be bled...start with the rear farthest away from the master cylinder then other rear...then right front, then last is left front...Hope this helps.

Sep 06, 2012 | 1995 Lincoln Mark VIII

1 Answer

1998 Dodge Caravan New brakes. Front Axel removed to get to power steering pump to remove it. Got van back brakes felt strange had to hit them hard car pulled infront of me. ABS light came on. brakes...


Bad brake master cylinder could cause this, It will start leaking internally and not build up pressure. Will happen just do to age, will need to replace it and bleed brake system.

Jun 12, 2017 | 1998 Dodge Caravan

1 Answer

2000 Chrysler Grand Caravan, replaced the front driver brake caliper, the brake lines from the master cylinder to the ABS and the rubber hose from the caliper to the brake line, bled all the brakes but the...


i suggest a bad master cylinder, but 1st answer this, when you apply brakes firmly and keep pressure on the brake pedal, does pedal go down while you're holding pressure on the pedal? if so, the master cylinders bad. and also have you checked the vacum to the brake booster?

Aug 24, 2010 | 2000 Chrysler Grand Voyager

5 Answers

Brake pedal goes to the floor only when engine is running. Pedal is perfect with engine off.


your power brake booster is blown out
the seal has a leak in it
run the truck for 3 minutes and shut it off. with the windows up listen carefully while you gently apply the brakes
listen for a hissing sound of air leaking.
the sound of these leaking is a very soft sound

Mar 27, 2010 | 1998 Chevrolet K1500

3 Answers

Brake pedal all the way to the floor...Possible abs module?


Im going to assume that a mechanic has already checked for the most simple causes like making sure the brakes have been bled. If the abs module is faulty it will default to just a no abs state, but that wont cause the pedal to go all the way to the floor. I agree that replacing the caliper is probably gonna fix the problem, but I might try to bleed the brakes first and see if that solves it first...

Jan 24, 2010 | 2001 Dodge Grand Caravan

1 Answer

1995 dodge caravan Break Hangup


this is most likely a fault in the Antilock brake system (ABS) hydraulic controller or a wheel speed sensor, have the system tested for trouble codes.

Jul 12, 2009 | 1995 Dodge Caravan

1 Answer

Changed front pads now pedal is spongy,but stops fine


Check for wheel cylinder leaks at rear wheels. Next master cylinder.

Jun 11, 2009 | 2001 Dodge Grand Caravan

3 Answers

Just replaced master cylinder on 1990 aerostar and bled the brakes, still the pedal goes to floor and i have no brakes


Did you bench bleed the master cyl. before installing it? then when you installed the new master, did you bleed all 4 points? If yes, then check all for points for leaking caliper/s and leaking wheel cylinder/s. If the van has ABS, check the valve body for a bleeder screw and see if air bleeds out of it. If you've checked everything twice and did everything right then your new master cyl. may be defective.

Apr 29, 2009 | 1986 Ford F 250

2 Answers

Brake pedal goes to floor after bleeding the brakes many times


start off by pumping the peddle 25 times with engine off ... bleed the abs system (usually has bleeder valves near/on control unit). then bleed the rest as usual with engine off ... DO NOT turn the key on while bleeding abs brakes.

Mar 18, 2009 | 2000 Dodge Caravan

Not finding what you are looking for?
1998 Dodge Caravan Logo

545 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...