Question about 1999 Ford F150 Regular Cab

1 Answer

What is the procedure for engaging a 92 ford f-250' 4x4 ?

I just bought a 92 ford f-250 automatic p/u with a diesel engine and I am not sure of the procedure for engaging the four wheel drive, can someone give me the heads up, please, James A. Smith

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 149 Answers

First thing to do is engage the lock out hubs on the front axels if it has them, they should say "free" or "lock". Turn them to lock. Then inside the cab on the floor hump will be the 2H 4H N 2L slector. Pull the slector lever into 4H and you are in 4WD high range. Do not drive the truck in 4WD on dry pavement, only gravel/dirt or snow. The minor difference between the front and rear wheel speeds will "wrap up" the driveline and make it hard to pull the lever out of 4WD. It is recommended that you back the truck up at least 10 feet after you remove it from 4WD to "unwrap" the drivelines. Your choice as to disengaging the front hubs, but it will save wear and tear on the front axels and dirveshaft if you disengage.

Posted on Jun 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What can I use this rf- e9dp-7006-aa transmission on a 92 ford f250 7.3 diesel?


Techtips Ford AOD and 4R70W Transmission History and Evolution

Here's an RF-E9DP-7006-AA AOD main case, an engineering revision time frame of 1989. "RF" is believed to mean Rouge Foundry (Dearborn, Michigan).

Oct 15, 2016 | Ford Cars & Trucks

2 Answers

Type of transmission fluid for 2001 7.3 diesel f350 superduty 4 wheeldrive


Make : Ford
Model : F-350 Superduty Supercab
year : 2001
Engine type : 7.3 Turbo Diesel
Transmission fluid type : 4R100 automatic transmission
Good Luck

Jul 05, 2014 | 2001 Ford F350 Super Duty SuperCab

1 Answer

92 Ford Escort LX Won't Start, Shows Fuel Cutout Light Upon Cranking Engine


cut off switch could still be bad. First my sure gas is getting to the engine....if so then this indicates that fuel system is working properly. Sounds like car may not be firering. Things that could cause this is coil bad, ingnition modual failed or maybe pickup coil."sensor maybe some where..timing out which would indicate timing belt or chain or gears are broke......Keep in mind these are just some things that could cause your problem and gives you ideal what to look for........hope this info helps and good luck....Please rate this post and if you need more help then fill free to contact me and we will try to get ya back on the road......

Aug 16, 2012 | 1992 Ford Escort 1.8

1 Answer

Owner Manual/Repair Manual with diagrams for 1999 F350 4x4 Diesel


Check out faxonautoliterature. They list an original Ford wiring diagram manual for your truck for $59. They also have a couple of different Ford service manuals for your engine, diagnostics and repair. If your wiring and relay problems are engine specific then a copy of Haynes Diesel Engine Repair Manual, part # 10330, will be right up your ally. For $20 it provides an excellent trouble shooting and repair manual for the DIY diesel owner. It has separate sectons for the 6.9 and 7.3 engines as well as GM. I know this isn't free but I hope it will help.

Dec 19, 2009 | Ford E-350 Super Duty Cars & Trucks

1 Answer

92 Ford 7.3 non-turbo won't start - worked fine minutes earlier


this may sound stupid but the next time this happens take some ice cold water and pour it over the injection pump.if it starts what you nhave is a bad pump.this is usually caused by someone washing off a hot motor and what happens is it changes the clearances just enough that hot, the pump cannot reach min injection pressure. the injection pump is located in the center front of the motor

Aug 23, 2009 | Ford F-450 Cars & Trucks

1 Answer

Power locks don't engage when driving


this is form the owners manual, page 19:

The Automatic Door Locks can be enabled or disabled by
performing the following procedure:

1. Close all doors and place the key in the ignition
switch.

2. Cycle the ignition switch ON/OFF four times ending
in the OFF position. (do not start the engine)

3. Within 10 seconds of the final cycle, press the interior
driver’s door lock switch to the LOCK position.

4. A single chime will sound to signify that you have
successfully completed the programming.

You can turn the feature back on by repeating the above
mentioned procedure or by performing the procedure in
the Electronic Vehicle Information Center (EVIC), Customer
Programmable Features section on vehicles so
equipped.

Aug 14, 2009 | 2005 Dodge Grand Caravan

1 Answer

Ford f250- 92 diesel 120,000


Your trans numbers are in your VIN Number.

Nov 17, 2008 | 1992 Ford F250

Not finding what you are looking for?
1999 Ford F150 Regular Cab Logo

334 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...