SOURCE: Audi Concert problem
you must check wiring cable of left speaker-reconnect antenna cable and check if it is firmly connected and apply contact cleaner over faders.
SOURCE: radio stuck in safe mode
Turn on radio - the word SAFE will appear in the display. Press th
P.SCAN and RBDS buttons simultaneously and hold them down until "1000"
lights up in the display.Release buttons.Do not, under no circumtances,
continue holding them down or press them once again. This will cause
the radio to consider the number 1000 to be the input code.Use station
buttons 1,2,3,and 4 to enter the code number on your Radio Card. Use
the button 1 to enter the first number 2 for the second number 3 for
the third number and 4 for the last number.Once you have entered the
code and it shows on the display,press the P.SCAN and RBDS buttons down
again simultaneously and hold them down until the word SAFE appears in
the display.Release buttons. Soon afterwards a frequency will be
displayed.
PLEASE RATE THIS !!!
SOURCE: timing belt replacement for Audi
Which engine do you have? It makes a big difference. If you have the 1.8T, here's everything you need:
http://www.audiworld.com/tech/eng35.shtml
SOURCE: I have a 2002 audi tt, the indicators are not working but the hazard lights are still working
check the fuse sounds like that has blown as hazards work on a relay indicaters are off a fuse
SOURCE: code to unlock a radio for a audi tt
you will need to get the serial number off of the radio and with the vin contact the dealership they should help.
166 views
Usually answered in minutes!
×